Mtgrizzlymns Boyer jeep wraith done!!!!

[mtgrizzlymn]

What do you guys think it has the velenium on 3s pacs under aluminum fillers
One pack each side!

[mtgrizzlymn]

Forgot spare tire!

[mtgrizzlymn]

Guys give me some feedback good or bad i dont mind it was my first hand built rig so take that into cosideration. How can i make it better? Anything look wrong like the links i made shocks anything. I couldnt have ever built this without the ideas of other people and the forsale section.

[JustinM]

Looks good to me!

[halfcab]

If you could flip the bolts around for the skid and use button heads with the nuts on the other side of the skid to smooth out the bottom, it won't drag and get hung up on them that way, not super fond of the colors but its not mine anymore

[mtgrizzlymn]

Thanks halfcab i love this thing as you new i couldnt wait for that frame to get to me. I got it to a jeep. I want to flip the tranny put a dig on front so i can switch from 4wd to 2wd.

[MntnHntr]

Great craftmanship. It looks like it will handle the breakovers well. You may need some weight on the front after the dig is installed.

[Kylar]

Looks good, what driveshafts are those?

[mtgrizzlymn]

Rc4wd punishers 165 mm. Weight up front is good for 2wd and i only have the veleniom under the hood i have a place to put a heavy bumper of some kind nuts already welded in place.

[Postclanker]

Are those metal axles ?
I like anything that's different...yours is unique, I like it

[mtgrizzlymn]

Yes they are vanquish axles.

[mtgrizzlymn]

Thanks guys i love the thing prob because it was harder than just a kit, and its unreal how many little parts a guy forgets he needs.

[mtgrizzlymn]

Im having som issues with body roll i figure the tires are soft of course but would a heavier shock oil or possibly a piston with less holes help it or am i totally on the wrong track when i give it full throttle it spins ofcourse and tries lifting one side of the front which sometimes just pulls it that way nothing like my exo wth mmm 2200 kv on 4s it spins all fours strait as an arrow all the way down the driveway?

[SlickRockSpider]

Originally Posted by mtgrizzlymn

Im having som issues with body roll i figure the tires are soft of course but would a heavier shock oil or possibly a piston with less holes help it or am i totally on the wrong track when i give it full throttle it spins ofcourse and tries lifting one side of the front which sometimes just pulls it that way nothing like my exo wth mmm 2200 kv on 4s it spins all fours strait as an arrow all the way down the driveway?

Heavier shock oil or pistons with less holes. Your center of gravity may need to be lowered. Maybe a disconnect style swaybar. How does it crawl ? Keep in mind your drive way has a lot of traction.

Exo has independent suspension and thats why. Like comparing apples to oranges.

Rig looks like a blast to drive. Have fun

[mtgrizzlymn]

Truthfully that velenium on 3s packs is to much for crawling ans slow speed cogging with a different motor combo it would be agreat crawler i think. Im going totry the shock pistons then maybe do some sort of sway bar i like that.

[mtgrizzlymn]

Boy with the wheelbase on this it sure will go straight up a hill very steep it has so much wheel speed wish i could have that and a good crawler speed to

[Meatwad]

Originally Posted by mtgrizzlymn

Boy with the wheelbase on this it sure will go straight up a hill very steep it has so much wheel speed wish i could have that and a good crawler speed to

Mmp & pro4 or wait for the Holmes sensored outrunners... Mission accomplished.

Good lookin rig.

[mtgrizzlymn]

Well made some heavier duty shock mounts on the lathe kind of new on it so it took me almost 3 hours to get them cut down put design in them and tap them and that was just the rear 2. Lol

[ScaleReady]

Originally Posted by mtgrizzlymn

Well made some heavier duty shock mounts on the lathe kind of new on it so it took me almost 3 hours to get them cut down put design in them and tap them and that was just the rear 2. Lol

Some of the most "simple" parts can take a while. Good looking rig

[mtgrizzlymn]

Thankyou it sure makes you appreciate what some of these guys make its far from easy and very time consuming. I always thought some machined parts were high priced but not anymore if a guy needs them in a hurry. There are some very talented people on this sight.