|
| LinkBack | Thread Tools | Display Modes |
08-27-2012, 07:14 PM | #1 |
I wanna be Dave Join Date: Apr 2005 Location: Eastern WA
Posts: 2,489
| Return of Spensy-Class 3 TTC wallet buster
So I'm waiting for payday to really get my order on but got this ordered so far, and some in my room Wraith axle housings VP chubs (free from TCS gift card) VP knuckles VP ackerman arms VP ti tie rod VP diff covers VP shock/lower link mounts VP bearing caps VP rear lockouts (for now, will be 4ws after it runs for a bit) VVP wraith shafts VP panhard 3 link kit CC bec (free from TCS gift card) SCX frame rails Next things I need is VP spools when they come out, HD bevel stock ratio front gears, HD bevel underdrive rear gears, stock rear shafts (for now, after I blow up a few I'll go 4ws with vvps) need : 2.2 pitbulls, 2.2 beadlocks, CC mmp, tekin pro4, 8711 steering servo, 4PL tx, ax10 trans (robinson gears, 32p spur), etc. Not sure on drivelines, shocks, etc. Going with an AX10 trans (no dig, after it runs and blows up the rear end, VVPs and VP chubs n knuckles) I bought a robinson 1pc gear, sent out to sniper to mill 5 holes to lighten it up a bit. Will start off slow but in a few weeks will get this thread rolling out Last edited by TLTCrawlin; 08-27-2012 at 07:34 PM. |
Sponsored Links | |
08-31-2012, 04:51 PM | #2 |
I wanna be Dave Join Date: Apr 2005 Location: Eastern WA
Posts: 2,489
| Re: Return of Spensy-Class 3 TTC wallet buster VP and fast eddy parts in Sent a robinson 1 pc to Sniper to get lightened, ordered all the hardware and AX trans, some lub, robinson idler gear, revo rod ends. |
08-31-2012, 10:28 PM | #3 |
I wanna be Dave Join Date: Jan 2006 Location: Henderson/Las Vegas, NV
Posts: 5,032
| Re: Return of Spensy-Class 3 TTC wallet buster
ill be watching...
|
09-01-2012, 01:49 AM | #4 |
I wanna be Dave Join Date: Apr 2005 Location: Eastern WA
Posts: 2,489
| Re: Return of Spensy-Class 3 TTC wallet buster
Nothing too fancy going on but should be badass
|
09-01-2012, 10:37 PM | #5 |
PapaGriz Yo Join Date: Apr 2004 Location: In the garage building the wife a crawler
Posts: 13,137
| Re: Return of Spensy-Class 3 TTC wallet buster
I saw you post this up the other day. Looking forward to updates. |
09-01-2012, 10:50 PM | #6 |
I wanna be Dave Join Date: Apr 2005 Location: Eastern WA
Posts: 2,489
| Re: Return of Spensy-Class 3 TTC wallet buster
Trying to buy stuff but I read all these new parts coming out so now I gotta wait (vp spools, 1pc rear Ti shaft, axial HD gears are soldout everywhere). I started building the trans, wanted complete axles first but thats all on hold. (Ordered all the screws, ax10 trans, robinson gears, BWD beefy motor plate) waiting for the supershaft top shaft to get back in stock to order that+ the slash slipper and 32t gears. I ordered revo rod ends, need to buy some all thread and see if I can get ti tubing from a free source . All the update I can do til parts show up and parts get released, will be ordering mayhem wheels when they email and 2.2 pitbulls when they release too. |
09-01-2012, 10:58 PM | #7 |
WOOPOOW!! Join Date: Nov 2008 Location: Atlanta, GA
Posts: 4,218
| Re: Return of Spensy-Class 3 TTC wallet buster
Cant wait to see what you do with this buddy! Fire up some of that cool ass 3d BS and get us a sneak peak! |
09-02-2012, 03:08 PM | #8 |
I wanna be Dave Join Date: Apr 2005 Location: Eastern WA
Posts: 2,489
| Re: Return of Spensy-Class 3 TTC wallet buster
Will definitely have some 3d drawings once I get a roller and I start measuring stuff out, like a bellcrank steering/CMS mount/etc. Going to order some Ti rear shafts, and hopefully mayhem monster 2.2s tonight , then Ill get 2.2 iroks, or wait for 2.2 pitbulls (most likely this) |
09-03-2012, 12:26 AM | #9 |
I wanna be Dave Join Date: Apr 2005 Location: Eastern WA
Posts: 2,489
| Re: Return of Spensy-Class 3 TTC wallet buster
Ordered 2.2 trail shooters and felsenfest wraith titanium 1pc shaft, found a set of HD stock gears, so now on the hunt for a set of OD or UD gears :(
Last edited by TLTCrawlin; 09-03-2012 at 03:38 PM. |
09-05-2012, 12:41 AM | #10 |
I wanna be Dave Join Date: Apr 2005 Location: Eastern WA
Posts: 2,489
| Re: Return of Spensy-Class 3 TTC wallet buster
Got some more bling. Good way to start a 4 day week. |
09-05-2012, 09:05 AM | #11 |
PapaGriz Yo Join Date: Apr 2004 Location: In the garage building the wife a crawler
Posts: 13,137
| Re: Return of Spensy-Class 3 TTC wallet buster
I love getting packages with parts. |
09-05-2012, 09:28 AM | #12 |
I wanna be Dave Join Date: Apr 2005 Location: Eastern WA
Posts: 2,489
| Re: Return of Spensy-Class 3 TTC wallet buster
Same. 5 more I'm waiting for lol.
|
09-06-2012, 03:16 PM | #13 |
I wanna be Dave Join Date: Apr 2005 Location: Eastern WA
Posts: 2,489
| Re: Return of Spensy-Class 3 TTC wallet buster
Only one blinging part for today Sniper lightened a robinson 1pc gear for the AX10 trans... |
09-06-2012, 03:19 PM | #14 |
I wanna be Dave Join Date: Aug 2011 Location: Burque
Posts: 3,805
| Re: Return of Spensy-Class 3 TTC wallet buster Looks really nice!
|
09-06-2012, 03:48 PM | #15 |
PapaGriz Yo Join Date: Apr 2004 Location: In the garage building the wife a crawler
Posts: 13,137
| Re: Return of Spensy-Class 3 TTC wallet buster
Looks trick and a great idea.
|
09-06-2012, 05:00 PM | #16 |
I wanna be Dave Join Date: Apr 2005 Location: Eastern WA
Posts: 2,489
| Re: Return of Spensy-Class 3 TTC wallet buster
He did a great job. Not sure on weight savings, need to get me a gram scale. But running a felsenfest spool and titanium rear shafts should save some weight over stock. VVPs probably added weight up front, but thats ok. talking to a few guys about making delrin beef tubes (SS sounds too heavy for me) not sure on how much the SS ones actually weighed in but I imagine heavy? |
09-06-2012, 06:49 PM | #17 |
I wanna be Dave Join Date: Apr 2005 Location: Eastern WA
Posts: 2,489
| Re: Return of Spensy-Class 3 TTC wallet buster
Cool story I ordered a wraith gear not an ax10. :( great
|
09-06-2012, 10:35 PM | #18 |
I wanna be Dave Join Date: Apr 2005 Location: Eastern WA
Posts: 2,489
| Re: Return of Spensy-Class 3 TTC wallet buster
Too much? I wanted the trans n all to sit lower, without losing uptravel as with a pro4 it should be jumping alot. Selling my lightened wraith gear and buying an AX10 one, can't justify putting a wraith rear housing on. Defeats my lightweight, simple/compact mentality. Awaiting more parts, and some time, worked 9am-11:30pm yesterday. Last edited by TLTCrawlin; 09-06-2012 at 10:48 PM. |
09-07-2012, 03:06 PM | #19 |
I wanna be Dave Join Date: Apr 2005 Location: Eastern WA
Posts: 2,489
| Re: Return of Spensy-Class 3 TTC wallet buster
Got a few things in. Working all day so bout to head back out :(
|
09-07-2012, 03:13 PM | #20 |
I wanna be Dave Join Date: Nov 2008 Location: Chillin in Utardia
Posts: 2,561
| Re: Return of Spensy-Class 3 TTC wallet buster
i always loved those wheels |
Return of Spensy-Class 3 TTC wallet buster - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pipes Class 3 TTC Build | PipeDreams | 2.2 Scale Rigs | 35 | 01-24-2014 03:38 PM |
| |