question on building chassis....
 

So I have gathered all my brazing supplies and have made a few bumpers and rock sliders easy enough... I am really wanting to tear down my wraith and build something one off... As I look through all of the threads in this section see some AMAZING WORK.

I was wondering if you guys are building these chassis off blueprint's or if there are general guidelines to follow. Ex. how do I get an idea of where my shock towers need to be brazed in and so on?
I am wanting to build a fully body chassis with either a tacoma, hilux or f250 body. So do I get the body first to get my measurements for pillars and what not?

Re: question on building chassis....
 

No blue prints for me, I just start with the desired wheelbase, then free hand the rest.

A few target measurements to establish first are:

Wheelbase
Overall length of chassis (nose to tail)
Where, and how long you want your skid
Where you want your link mounts
How tall (slider to roof)

Those are just a few starting measurements to base your proportions off of, and get you started. The rest should fall into place with the neurosis of detail sets in."thumbsup" "thumbsup" "thumbsup"

Re: question on building chassis....
 

I useally look at pics of 1.1 rigs to get ideas ,the wraith is a nice platform to work with and if you keep everything as close to the same it will be a lot easier ,basicly just remove the chassis and leave everything else alone attached to the skid.

Re: question on building chassis....
 

I work off of images downloaded. I'll create some 2d sketches to get basic dimensions to follow. Then I just go.

As far as shock towers and such. I start with my skid plate at the height I want it for full bump on the shocks. Then after I make the base frame I can create the hoops or whatever I'm mounting the shocks to and all I have to do to figure out where they mount on the frame is to push them all the way down and see where the top hole ends up. Them measure off the frame rail and get to fabbing

Good luck

Re: question on building chassis....
 

Ok thanks guys, that was a big help. I think for my first build I'm going to use the wraith skid so i don't have to worry about link geometry and what not from the get go...
One question... When your are building a chassis for a full body rather than panels, are you building Pillars and a roof line to Closely mimic the inside of the body?

Re: question on building chassis....
 

On my Honcho I did an internal cage and I got as close to the body as possible.








There are few decent pics in my thread before I painted the body where you can see how it's a tight fit.

http://www.rccrawler.com/forum/axial...oma-build.html



<a href="https://www.flickr.com/photos/47928706@N02/9475361084" title="iphone 829 by my beer goggles, on Flickr"><img src="https://farm8.staticflickr.com/7397/9475361084_099a685a82_c.jpg" width="800" height="598" alt="iphone 829"></a>

<a href="https://www.flickr.com/photos/47928706@N02/10295934873" title="honcho 058 by my beer goggles, on Flickr"><img src="https://farm6.staticflickr.com/5491/10295934873_f1c75cfe76_c.jpg" width="598" height="800" alt="honcho 058"></a>

Re: question on building chassis....
 

I utilize a mix of both cad/cam and freehand/off the top of the head ideas as I go. Typically Ill get a rough idea together in my head and utilize basic cad programs so everything has the same bends/angles and is square once brazed.

Re: question on building chassis....
 

Are you guys using cad print outs like Harley does in his videos? Or its it easily enough managed with out them

Re: question on building chassis....
 

Freehand and alot of measuring and you'll be good to go. Dont be intimidated, only way to learn is to try. Good luck!!

Re: question on building chassis....
 

All of my blueprints are available for free download on my site if you want something to look off of, start with, modify from, use as toilet paper, wallpaper your kids crib, or beat the dog with....

Found here: Free RC Crawler Tube Chassis Design Templates | Harley Designs

Re: question on building chassis....
 

I freehand after width and wheelbase measurements figured out, its nice to have a nice piece of steel as a base to work on and I love using machinist step blocks to keep things even!

Re: question on building chassis....
 

are there any free cad programs you guys would recommend to teach myself on? how about sketchup?

Re: question on building chassis....
 

John I am with you man, after watching these guys I need to try and build a chassis. I need to ask you about the materials you are using next time we hit the trails.

Re: question on building chassis....
 

I've started with the body on my last build, and my current one. For the sake of the forum section, I'll use my 2.2 as the example.

I'll trace a side view of the body on a piece of poster board, and then locate where I want my axles to sit to show the wheelbase. I'll then draw out a basic side view of my initial thoughts of how I want to build the chassis.

https://fbcdn-sphotos-b-a.akamaihd.n...41e8a419354c07

From there I'll start bending tube/rod on using the poster board drawing(s) as a template.

https://scontent-b-ord.xx.fbcdn.net/...08&oe=556E017B

After this point, I work from measurements from the inside of the body, and around suspension compontents, or anything else I happen to overlook at the beginning.

https://scontent-a-ord.xx.fbcdn.net/...ce&oe=555E843F

And don't be afraid to make mistakes, it happens, I ended up cutting the entire front clip off after the above pic because it didn't give room for the shocks, and I just wasn't happy with the look (even though it was going to be hidden)

https://fbcdn-sphotos-f-a.akamaihd.n...0f94652973cdb8

You can end up with much better results than you originally plan for

https://scontent-a-ord.xx.fbcdn.net/...7e&oe=5564B29F
https://scontent-a-ord.xx.fbcdn.net/...71&oe=555843C4
https://fbcdn-sphotos-g-a.akamaihd.n...986757a9e01e6c

But most of all, have fun with it! I enjoy the build just as much as driving them.

-Derek

Re: question on building chassis....
 

that is awesome work man... thanks for the pointers

Re: question on building chassis....
 

Thanks harley!. I downloaded the IBEX file as I will be using some rendition of the wraith wheel base and also the skid... so i think I will be able to use alot of it. thanks again man

Re: question on building chassis....
 

All of my rigs are built in my head days or weeks before I fire up the welder, I don't use blueprints. Most of the time when I am building a chassis I rarely even measure....its all built by eye and most of the time comes out pretty square. If I am making a chassis or part for some one I will sketch it on paper to give them an idea of what I am thinking.


You won't know unless you try, if it doesn't turn out....toss it to the side and start over.


http://www.rccrawler.com/forum/membe...2367-29074.jpg