|
| LinkBack | Thread Tools | Display Modes |
04-01-2012, 06:49 PM | #1 |
Rock Crawler Join Date: Jan 2007 Location: West Seneca
Posts: 770
| mindless kickin it old skool CDW 1.0 Sporty
Well first off big thanks to Buckimod for the hook up on the chassis thanks buddy and sorry but this is more of a built thread than build thread, im not good at keeping track as i go This is a chassis ive always wanted since day one and was never able to get my hands on one till now. For the past couple seasons ive been running a Mayhem chassis with great results but if you know me i can never leave well enough alone soo here we go. Parts run down: CDW 1.0 chassis CS 170 servo FXR Integy 35t v11 Gen Ace 850 3s Axial axles over under drive Long beef tubes with xr knucks and Cs Axial trans with HR aluminum gears and steel out puts MIP Front shaft plastic rear 3.5" ebay shocks with losi mini springs I spent about all day trying to get my electronics to fit and steering to work electronics were some how easier than the steering. Trying a BTA steering and could never get the steering angle i was after. Ended up just going with a link mounted up front 5 mins of work and worked perfect Shot of the steering angle i ended up with still rubs a touch on the servo but not to bad My knock off shocks that are surprisingly smooth and come with rods ends on each side. Mini springs also fit perfect on them. About 2.75" belly clearance at rest front droops out another half inch. I also tried a different cut on my boss claws angle seems perfect when steering makes it seem to hook even harder. And as always running my ugly truckling body just cant retire it just yet. Truck weighs in at 5.3lbs and feels great there i might try knocking it down into the 4s i tried the old set up once at 4.5lbs and felt good but needed soft springs, was running losi whites all around. I think with the losi mini springs it might like it better. But for now it will be sitting at 5.3lbs till i get some tuning on it. Hope you guys like it any questions just ask Last edited by mindless; 04-02-2012 at 09:30 PM. |
Sponsored Links | |
04-01-2012, 08:52 PM | #2 |
I wanna be Dave Join Date: Aug 2011 Location: Burque
Posts: 3,805
| Re: mindless kickin it old skool CDW 1.0 Sporty
Looks great man. I used that cut pattern in some pin tires I made and it worked pretty good |
04-01-2012, 08:58 PM | #3 |
Rock Crawler Join Date: Nov 2011 Location: Wister, OK.
Posts: 697
| Re: mindless kickin it old skool CDW 1.0 Sporty
Looking good The ugly truckling looks like it's about ready for some paint! |
04-02-2012, 08:19 AM | #4 |
Rock Crawler Join Date: Jan 2007 Location: West Seneca
Posts: 770
| Re: mindless kickin it old skool CDW 1.0 Sporty
Yea the tires seem to work real well around the house weather has been bad so hasn't seen rocks yet but hopefully they work the way I plan And as far as painting it why would I do that I might screw it up haha |
04-02-2012, 08:46 AM | #5 |
I wanna be Dave Join Date: Dec 2009 Location: .
Posts: 7,967
| Re: mindless kickin it old skool CDW 1.0 Sporty
Back the cracked and chipped white with a contrasting color like black or red, may look sweet!
|
04-02-2012, 09:03 AM | #6 |
Custom Carbon Fiber Join Date: Oct 2007 Location: Connecticut :(
Posts: 4,501
| Re: mindless kickin it old skool CDW 1.0 Sporty
Im liking for a sporty I miss my CDW v1 |
04-02-2012, 09:10 AM | #7 |
Rock Crawler Join Date: Jan 2007 Location: West Seneca
Posts: 770
| Re: mindless kickin it old skool CDW 1.0 Sporty
I've been thinking of doing red I need to make some window masks first lack of motivation though for painting things haha
|
04-02-2012, 09:50 AM | #8 |
Rock Crawler Join Date: May 2009 Location: Bellaire
Posts: 743
| Re: mindless kickin it old skool CDW 1.0 Sporty
Looks good Man! |
04-02-2012, 10:29 AM | #9 |
Rock Crawler Join Date: Jan 2007 Location: West Seneca
Posts: 770
| Re: mindless kickin it old skool CDW 1.0 Sporty
Thanks buddy
|
04-02-2012, 07:42 PM | #10 |
I wanna be Dave Join Date: Aug 2011 Location: Burque
Posts: 3,805
| Re: mindless kickin it old skool CDW 1.0 Sporty
What are your front and rear track widths?
|
04-02-2012, 09:22 PM | #11 |
Rock Crawler Join Date: Jan 2007 Location: West Seneca
Posts: 770
| Re: mindless kickin it old skool CDW 1.0 Sporty
10.75 and 10.5 Pretty much what i run on all my rigs
|
04-02-2012, 09:23 PM | #12 |
RCC Addict Join Date: Sep 2006 Location: Depew
Posts: 1,551
| Re: mindless kickin it old skool CDW 1.0 Sporty
About time you made a build thread...
|
04-02-2012, 09:28 PM | #13 |
Rock Crawler Join Date: Jan 2007 Location: West Seneca
Posts: 770
| Re: mindless kickin it old skool CDW 1.0 Sporty
I make wayyyy to many changes to keep track this one hardly makes sense LOL
|
04-02-2012, 09:30 PM | #14 |
I wanna be Dave Join Date: Aug 2011 Location: Burque
Posts: 3,805
| Re: mindless kickin it old skool CDW 1.0 Sporty |
04-03-2012, 07:44 AM | #15 |
I wanna be Dave Join Date: Oct 2008 Location: Sumter
Posts: 6,141
| Re: mindless kickin it old skool CDW 1.0 Sporty
So which shocks are those and what do they measure fully extended?
|
04-03-2012, 08:33 AM | #16 |
Try to Bend it Join Date: Aug 2009 Location: Perth Australia
Posts: 3,163
| Re: mindless kickin it old skool CDW 1.0 Sporty
Looks cool, your work bench is in the same state as mine |
04-03-2012, 07:20 PM | #17 | |
Rock Crawler Join Date: Jan 2007 Location: West Seneca
Posts: 770
| Re: mindless kickin it old skool CDW 1.0 Sporty Quote:
These are the shocks they are 3.5" extended, they seem to stick after sitting but are butter smooth after not sure if its from the shock oil thats in them i never changed it just running them as is. Also the way i have the springs in the pic doesnt work very well makes the spring compress funny so i moved them down some and seem to work good. LOL yea i have a whole work shop that i do major things in but theres no 50" tv in there sooo the bed room it is HAHA Last edited by mindless; 04-03-2012 at 07:27 PM. | |
04-03-2012, 07:29 PM | #18 | |
Rock Crawler Join Date: Jun 2011 Location: San Diego
Posts: 698
| Re: mindless kickin it old skool CDW 1.0 Sporty Quote:
| |
04-03-2012, 07:34 PM | #19 |
Rock Crawler Join Date: Jan 2007 Location: West Seneca
Posts: 770
| Re: mindless kickin it old skool CDW 1.0 Sporty
Yea it seems like you have to crack them loose then theyre good maybe theyll break in once i get some cycles on them
|
04-03-2012, 08:11 PM | #20 |
RCC Addict Join Date: Sep 2006 Location: Depew
Posts: 1,551
| Re: mindless kickin it old skool CDW 1.0 Sporty
Take a razor blade and deburr the piston. Probably a shitty ass plastic, or maybe they're steel.....
|
mindless kickin it old skool CDW 1.0 Sporty - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Kickin' it at Da party | Da Hermit | Hawaii | 7 | 01-01-2009 11:36 AM |
Kickin' azz | Micropuller | Chit Chat | 1 | 04-07-2007 05:37 PM |
kickin around an idea | Bknight | Chit Chat | 3 | 08-27-2006 09:43 AM |
| |