Team Zig~Zag Slingshot After much deliberation, I finally made the switch over to axial. I decided to go with the Visionary Fabrication Slingshot for this build. So far I like everything about the chassis. I used Revo rod ends for the links. This gave me a 12" WB. So what I did was swap out the rear chassis side rod ends to Jato rod ends, that set me just over 12 3/8". Specs. Chassis- VF_Slingshot_w/HC_links Axles- AX10_locked_axle_set RCP_max_clearance_knuckles RCP_clockable_C's RCP_staight_axle_adapter RCP_SS_straight_axle Tansmission- AX10_trans VF_Dig VF_Motor_plate Shocks- Losi .6 buggy shocks 1x Cups&ends 4x Ti-niride_shafts 2x Threaded_body 4x Cartridge 1x Shock_pistons 1x 80wt_oil Springs- Front_red/Rear_black Link mounts- Front_TCS_servo/link & rear_TCS_boomerang Battery mount- TCS_axle_plates Battery- 8-cell_Elite_2/3A_1500 Motor- HH_Cobalt_5t ESC- Tekin_FXR V. regulator- CC_BEC Steering servo- Hitech_5995tg Dig servo- Hitech_5245mg Radio- Spektrum_DX3R Rims- Rockstars Soon to be rolling on VF_Stalkers Tires- Losi_Rock_Claws Body- Losi_Grappler http://i23.photobucket.com/albums/b3...Picture044.jpg Big Mahalo to Kevin from TCScrawlers.com Brian from RCPCrawlers JohnRobert from HolmesHobbies.com Cory from RPPhobby Don & Brock @ Visionary Fabrication & Brad aka BENDER |
|
That looks good DTP, what's your center clearance at? |
One more thing, quite a few poeple have complained about thier digs from VF. When I first assembled it, it wasn't quite as smooth as I had hoped. Talked to Don & he gave me some things to check. I found I had tightened the case too tight. I dissasembled it & since it was open I sanded down the brass pin on the drive cog. Now it's as smooth as butter, as they say. |
Quote:
I'm headed out the door to do some testing. |
Very nice "thumbsup". |
Nice build"thumbsup", It must have taken you an hour to type that parts list with the links and all. |
Quote:
Great looking build there. How does she perform? |
Nice build! How do you like it? 80. |
Quote:
Quote:
Quote:
Quote:
Just got home from crawling. Seems to perform very well. It's definately not the same as Fat Cat. I do like the center clearance, it seemed alittle more tipsy than AFC. But I think that's because that was what I was used to. More drive time & I'll have it dialed in. The suspension was very smooth. I need to try the Badlands as they sidehill better. |
man looks awesome , i realy like the stance / paint alot |
Awesome Job DTP "thumbsup", where did you get tthe links? They look like delrin? 3" of clearance and it still looks Paved!!! sweet. |
you can get the vf chassis with the links. either straight lowers or bent lowers and the bent uppers... nice build. i have yet to take mine out and test it yet. it's been built for the last few weeks and time is short so it still just sits on display. bummin'... |
Excellent build thread, excellent build "thumbsup" |
DTP, Very nice build and best of luck this year. ;-) "thumbsup" |
Quote:
|
Quote:
Quote:
Quote:
Quote:
Quote:
|
Ian, what are you doing in here? |
Quote:
|
How are the 2/3A battery packs holding up to the 5T Cobalt? Whats your gearing? Do you like it? Are you considering lipo's? Pros - Cons? Reason I ask is seems like most people "reccomend" lipo's with the colbalt puller motors... |
Quote:
Oh yeah, thanks.;-) Quote:
|
akshon shots Some pics from yesterady on the rocks. Enjoy.;-) http://i23.photobucket.com/albums/b3...Picture046.jpg http://i23.photobucket.com/albums/b3...Picture047.jpg http://i23.photobucket.com/albums/b3...Picture048.jpg http://i23.photobucket.com/albums/b3...Picture049.jpg http://i23.photobucket.com/albums/b3...Picture050.jpg |
nice work sheldon i hope ill get to see on Sunday |
Quote:
|
Very well thought out truck"thumbsup" That body looks absolutely killer and goes with the rig very nice. I love the diversity of rigs that you see on Rccrawler. So many options on different parts. You know, if that rig was around just one year ago, I couldn't imagine the crowd it would've drawn. |
Yet another "KillaH" build Sheldon And a great job on the parts listing and links "thumbsup" |
Quote:
he didn't desert me........................agent fat cat's going thru a "short" change right now "thumbsup". and you better be a little concerned about sunday :shock:. nice build up DTP, and best of luck too you too "thumbsup". |
Team Zig-Zag Slingshot Great build and great thread. All the links really are very helpful. Many thanks. When you change out your wheels from the RC4WD Rockstars to the VF stalkers will you be selling the Rockstars? If so, I would be an interested buyer. Let me know if you would please. |
Quote:
Quote:
Quote:
Quote:
Quote:
Sorry, I'm keeping these rims. If you've seen any of my other crawlers & RC's you these Rockstars were named just for me.:lol: And these are one of only a very few things I actually like from RC4WD. |
Nice build,that chassis looks real good "thumbsup". I see you have the Tekin FXR ESC, How do you like it? I was reading an article about it last night, and it looks good for the money!:lol: |
Quote:
|
Sweet ride hope I can see you drive at one of the comps, one of these day. Good luck. |
Quote:
|
Quote:
Quote:
Quote:
|
That looks great! How do you like the Slingshot? |
wow sheldon!!! looks awesome!!! |
Great showing at the comp Sheldon!!! |
awesome comp rig sheldon "thumbsup", i'm sure glad you didn't come out with that in the beginning of the season................probably would've been a different outcome at the winter finals. nice win and great come back "thumbsup". looks like the 2nd half of the season will not be a repeat for me:cry:. beautiful rig, and awesome capabilities. |
That thing looks good. I just ordered my Delrin version and I'm gonna swipe a few ideas from ya:twisted: |
Quote:
|
All times are GMT -6. The time now is 06:34 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com