| |
06-01-2008, 02:35 PM
| #1 |
| RCC Addict Join Date: Jan 2007 Location: Arkansas
Posts: 1,782
|  My stimulus check
Georgie said spend it so I did.  Specs: Axial trans and axles Narrowed Reign J2-TT Losi Rock Claws RC4WD Cyclones Losi Crawler shocks Tekin FX-R Warrior 35t TCS 4 link stuff (delrin boomerang rear and aluminum servo plate front) Grappler body painted with Faskolor Bent links in the front Stampede driveshafts and metal yokes until the MIPs come out Futaba 2.4ghz stuff JR650M Castle BEC 8 Cell Elite pack Onto the testing pics:      Needs a little tweaking to get rid of the torque twist and I need a slipper and better driveshafts. |
|  |
| Sponsored Links | |
| | |
|
06-01-2008, 03:23 PM
| #2 |
| Quarry Creeper Join Date: Aug 2005 Location: newport
Posts: 408
|
Check out the hot racing axial Driveshaft rings from TCS  |
|
| |
|
06-01-2008, 06:09 PM
| #3 |
| Pebble Pounder Join Date: Jan 2008 Location: Michigan
Posts: 164
|
Dont get the drive shaft rings, if anything go with Some BEEF, Maxx Shafts. Maxx shafts RULE. I just set mine up today and it is well worth building. I have ran stampede and jato shafts and blew each. Driveshaft rings didnt help me at all. Search for, Maxx Shaft Build. It will give you all the info. It only cost me $19.50 for the parts and about 3 hours to build. |
|
| |
|
06-01-2008, 07:48 PM
| #4 |
| RCC Addict Join Date: Jan 2007 Location: Arkansas
Posts: 1,782
|
I actually have everything to do the swap but I dont want to do it. I dont want to hack $35 worth of yokes when I can spend $40 and get everything (and keep the yokes for another project). When the MIPs come out I'll get them with the slipper and be done. Hopefully. The pedes do good on my scaler with 6 cells and high gearing but with 8 cells and the lower gearing here they dont fare so well. I have a few more spur gear/pinion combos coming in this week along with more Pede shafts and springs. Should be running again pretty quick. |
|
| |
 |
| |
Linear Mode
