| |
| |||||||
 |
| | LinkBack | Thread Tools | Display Modes |
09-12-2008, 02:01 PM
| #1 |
| Newbie Join Date: Aug 2008 Location: nc
Posts: 36
|  Integy 55T motor - How Do I Install It?
I just got my Integy 55T motor for my AX-10. I am wondering if this is difficult to put in or is it plug and play? I also have the 14t pinion that came with the AX-10 that I am gonna use...any help would be appreciated.
|
|  |
| Sponsored Links | |
| | |
|
09-12-2008, 02:13 PM
| #2 |
| Rock Crawler Join Date: Apr 2008 Location: Highlands Ranch, Co.
Posts: 852
|
Post up what speedo you will be using with the motor.
|
|
| |
|
09-12-2008, 02:18 PM
| #3 | |
| Newbie Join Date: Aug 2008 Location: nc
Posts: 36
| Quote:
| |
|
| |
|
09-12-2008, 02:48 PM
| #4 |
| Rock Stacker Join Date: Aug 2008 Location: Lincoln
Posts: 86
|
It's easy. You just have to take the stock motor out and unplug it from the esc. Now, you will either have to unsolder the wires from the old motor and solder them to the new motor (which is what I did to mine and I would suggest for now), or cut the connectors off the ese and solder them directly to the new motor (which will void the warranty). Install you gear to the new motor and reinstall the motor to the tranny. Put a piece of paper between the gears to set up the proper gear mesh and should be good to go.
|
|
| |
|
| |
Linear Mode
