|
| LinkBack | Thread Tools | Display Modes |
12-06-2008, 02:18 AM | #1 |
I wanna be Dave Join Date: Aug 2007 Location: santa monica
Posts: 3,687
| anyone else missing transmission screws?
I bought two transmissions from two different vendors and EACH came with the same missing screws-the three M3x8 that hold the spur on. Also only have 2 mounting screws between them. When the M3's were missing in the first one I didnt sweat it as one will be a transfer case but when the second came missing them too...somethings going on. Has this happened to anyone else or is it a weird coincidence between the two I bought? These were individual transmissions, not part of the whole ax-10 kit. |
Sponsored Links | |
12-06-2008, 04:56 AM | #2 |
Quarry Creeper Join Date: Nov 2007 Location: NH
Posts: 427
|
It's probably because in the kit form the trans parts come in one or more bags and the spur (and parts) are in another. I bought one from my lhs and found the same thing. Lucky for me I had a ton of tmaxx engine mount screws kicking around that have washers pre-installed that work perfect.
|
12-06-2008, 05:22 AM | #3 |
I wanna be Dave Join Date: Mar 2008 Location: In the Dark Edges of your Mind
Posts: 6,386
|
I ordered a trans from from a vendor on here and It was complete except for the spur gear screws. Bought a spur gear at the lhs and it was only the gear, no screws. I think that in the kit they are in a different hardware bag that may have stuff you don't need for the tranny, so they don't send it. |
12-06-2008, 07:13 AM | #4 |
Rock Stacker Join Date: Jun 2007 Location: Norway
Posts: 62
|
I've bought 2 transmission from the same vendor but at different times. On the first transmission the screws were missing, the seccond one was complete.
|
12-06-2008, 07:21 AM | #5 |
Quarry Creeper Join Date: Sep 2005 Location: Creeping in the Dark!!!
Posts: 349
|
Just go to your local HS or Hardware store & pick up some screws!
|
12-06-2008, 02:58 PM | #6 | |
I wanna be Dave Join Date: Aug 2007 Location: santa monica
Posts: 3,687
| Quote:
thanks. interesting to know I'm not the only one. | |
12-06-2008, 05:38 PM | #7 |
Quarry Creeper Join Date: Jul 2008 Location: Erin, Ontario, CANADA
Posts: 471
|
M3 x 8mm (hex) button head: use HPI HPIZ352 (pkg of 10) or Axial AXIA114 (pkg of 10) Narly1 |
| |