| |
11-01-2009, 05:14 PM
| #1 |
| Pebble Pounder Join Date: Sep 2009 Location: Dallastown
Posts: 170
|  what jeep body
I have a axial stock chassis and was wondering what jeep body looks the best w/ it?
|
|  |
| Sponsored Links | |
| | |
|
11-01-2009, 05:21 PM
| #2 |
| Newbie Join Date: Dec 2005 Location: Bentonville, AR
Posts: 19
| Jeep Body
Unless you get your hands on JK (New Bright, etc) body and custom build chassis --- your best bet is the Jeep Rubicon body by HPI --- its 24.99 from towerhobbies http://www3.towerhobbies.com/cgi-bin...?&I=LXGTE7&P=7  |
|
| |
|
11-01-2009, 05:24 PM
| #3 |
| Pebble Pounder Join Date: Sep 2009 Location: Dallastown
Posts: 170
|
is it a direct fit or any mods needed for the hpi
|
|
| |
|
11-01-2009, 05:53 PM
| #4 |
| Rock Stacker Join Date: Jun 2009 Location: Ottawa
Posts: 53
|
best bet is to pick you the vertical body post from proline to make mounting it easy.
|
|
| |
|
11-01-2009, 06:00 PM
| #5 |
| Rock Crawler Join Date: Nov 2008 Location: Beloit,ohio
Posts: 653
|
Heres a few pics to help ya. Blue one is hpi (lexan). Others are hardbodies from newbright.    |
|
| |
|
11-01-2009, 10:40 PM
| #6 |
| Rock Crawler  Join Date: Apr 2006 Location: Hartland, MI
Posts: 788
|
This is one I put on an old Bender chassis a few years ago:    There is quite a bit of trimming, but used the horizontal mounts with clips on inside and outside to keep it on. Boatsided the bottom, worked pretty well. If you don't want to trim it up, you'll have to mount it a lot higher. |
|
| |
|
11-02-2009, 03:21 PM
| #7 |
| Pebble Pounder Join Date: Sep 2009 Location: Dallastown
Posts: 170
|
is the top blue hpi on a stock chassis?
|
|
| |
 |
| |
Linear Mode
