|
| LinkBack | Thread Tools | Display Modes |
09-29-2011, 05:01 PM | #1 |
Rock Stacker Join Date: Jun 2011 Location: In the Reptile Shack
Posts: 82
| RideLowInAGTO's awsome Frogger 2.0
Got the Frogger chassis a while back and it's been sitting, so I decided to finally give it the attention it needs. There plenty of work to be done before it's ready for its first comp. This is a new setup for me and im sure I will need lots of help/hints along the way. Parts on it currently... Frogger 2.0 chassis LOSI 4in shocks HB 2.2 Rovers Mamba Max HH 35t motor Axial CVD's Junfac shafts Narrowed XR10 wheels Over/Underdrive gears Hobby Co. CS170 servo Vanquish Zero-ackerman knuckles 5/8in grub screw wheel weights What's needs to be done/ bought... Different steering setup... BTA Clock the C-Hubs Beef Tubes Dig unit Mini T or RC18 springs VP Razors Last edited by RideLowInAGTO; 10-17-2011 at 07:39 PM. |
Sponsored Links | |
09-29-2011, 08:19 PM | #2 |
Rock Crawler Join Date: Jan 2007 Location: West Seneca
Posts: 770
|
Just two things i noticed, one the rear lower links might give better clearance flipped around. And second you are going to have a hard time getting that to turn with the caster so far forwards most ppl like more negative caster to clear shocks and improve steering.
|
09-29-2011, 08:36 PM | #3 |
Rock Stacker Join Date: Jun 2011 Location: In the Reptile Shack
Posts: 82
| |
09-29-2011, 09:02 PM | #4 |
RCC Addict Join Date: Dec 2008 Location: Sonora, CA
Posts: 1,664
|
Always great to see a "OG" Frogger. I have been updating mine lately. Great Job ! Keep up the tuning I always find more to do with mine.
|
09-29-2011, 09:16 PM | #5 |
Rock Crawler Join Date: Jan 2007 Location: West Seneca
Posts: 770
| |
09-30-2011, 09:01 AM | #6 |
Pebble Pounder Join Date: Nov 2010 Location: flagstaff
Posts: 114
|
I would check with KC to see if he still has frogleg's for sale .Also add Vanquish razors to your list . O and a eem dt skid too good luck
|
09-30-2011, 02:45 PM | #7 |
Rock Stacker Join Date: Jun 2011 Location: In the Reptile Shack
Posts: 82
| I check on the LEGz later... Id like to try these first since there already on there. Also dont really plan on buying rims anytime soon unless i find them cheap and im going to change the skid. It was just something i had at the time for mockup...
|
09-30-2011, 02:46 PM | #8 |
Rock Stacker Join Date: Jun 2011 Location: In the Reptile Shack
Posts: 82
|
Also what do you guys think... Mamba Max or Mamba Micro Pro?
|
09-30-2011, 02:49 PM | #9 |
Rock Crawler Join Date: Aug 2011 Location: tri cities
Posts: 582
| |
09-30-2011, 02:57 PM | #10 |
Rock Stacker Join Date: Aug 2004 Location: holland oh
Posts: 81
|
very nice build
|
09-30-2011, 03:53 PM | #11 |
Rock Stacker Join Date: Jun 2011 Location: In the Reptile Shack
Posts: 82
|
Finally got a hold of some Axial CVD's with gunnar pins... Planning on buying the Junfac shafts tonight. Also im still looking for High-Clearance Knuckles and ideas on different steering setups, like BTA. Also i updated the list of what needs to be done... More pics tonight |
09-30-2011, 06:27 PM | #12 |
Rock Stacker Join Date: Jun 2011 Location: In the Reptile Shack
Posts: 82
|
Here's the pics i said i would have... The motors installed, now i need to make a esc mount for the front uppers out of lexan. I tried setting up the upper links different. LMK what you guys think. The front upper links are for mock up for the time being, swap them out with some custom ones later... Also what mini-t springs would you recommend? How stiff? |
09-30-2011, 11:59 PM | #13 |
Rock Crawler Join Date: Aug 2010 Location: Saint Marys, OH
Posts: 934
|
Most people seem to like the hot pink and/or orange ones. I recently picked up some springs for AE's RC18. I went for the Blue and Gold rate, don't know the actual rates off-hand. Not a common one, but I was able to find a thread on here somewhere. My LHS sold me 3 pairs for a whopping $6, they wanted $10 for 3 pairs of the Losi ones.
|
10-01-2011, 05:10 PM | #14 |
Rock Stacker Join Date: Jun 2011 Location: In the Reptile Shack
Posts: 82
|
Ill add the springs to my list I bought some XR10 wheels and im planning on buying a set of Over/Under gears tonight |
10-03-2011, 03:44 PM | #15 |
Rock Stacker Join Date: Jun 2011 Location: In the Reptile Shack
Posts: 82
|
The shafts arrived today and got them installed... Axial CVD's w/ gunnar pins Still need to get High clearance knuckles before i can see how much steering i can get. And i got a new pet over the weekend check it out... |
10-03-2011, 05:31 PM | #16 |
I wanna be Dave Join Date: Aug 2011 Location: Burque
Posts: 3,805
|
Nice that is a really good upgrade to make and a nice looking snake too. |
10-03-2011, 05:34 PM | #17 |
Rock Stacker Join Date: Jun 2011 Location: In the Reptile Shack
Posts: 82
|
Yea ive got a few snakes around the house... Another one of my hobbies
|
10-03-2011, 05:35 PM | #18 |
I wanna be Dave Join Date: Aug 2011 Location: Burque
Posts: 3,805
|
Another one of mine as well...
|
10-03-2011, 05:54 PM | #19 |
Pebble Pounder Join Date: Nov 2010 Location: flagstaff
Posts: 114
|
Good luck with 9 mm weight system 21 177mm pellet's is magic number. Melt them one @ atime in casing be careful sorry about pic |
10-03-2011, 06:05 PM | #20 |
RCC Addict Join Date: Jan 2009 Location: Crawlifornia
Posts: 1,941
|
your Over and under gears are in route |
| |