Looks great Ronald. I like your thinking. I have cf tube in the mail i baught last week. I ordered it locally interstate but it didnt arive before the Easter Public Holidays. I too am looking at doing similar but until my tube arives cant do much. Good clear write up too :) Sent from my GT-I9300 using Tapatalk 2 |
Re: Haastnooit's AXR10 2.2s NCD SuDuOne Hi Ronald can you make a set for me Jan |
Re: Haastnooit's AXR10 2.2s NCD SuDuOne Quote:
|
Re: Haastnooit's AXR10 2.2s NCD SuDuOne Not so much progress on the car this evening, but still creeping ahead. I checked out the CF links and they look and feel OK, the rodends are secure … I did some minor testing with hands only though. Confident enough to mount them, so that was done … "thumbsup" http://i1123.photobucket.com/albums/...ps2195deea.jpg Weighed the links first offcourse … together with the delrin links, all links come together at a weight of 61 grams. The chaotic Ti links on my XR come in at 94 grams, both with steel traxxas hollowballs … quite a difference :shock: Spend the most time tonight setting up a bigger “photocorner” to make it easier to get good pics of a fully build car. I made one to maximum the size of my current favorite spot, it is 25% bigger then my old one … It will do for now … tonights test shots: http://i1123.photobucket.com/albums/...psfad98d2b.jpg http://i1123.photobucket.com/albums/...ps174f6418.jpg http://i1123.photobucket.com/albums/...ps2bcb7fde.jpg http://i1123.photobucket.com/albums/...psef89f668.jpg http://i1123.photobucket.com/albums/...ps7271ca31.jpg |
Re: Haastnooit's AXR10 2.2s NCD SuDuOne Hi, Nice build "thumbsup" in particular the CF links :mrgreen: ;-) @+ |
Re: Haastnooit's AXR10 2.2s NCD SuDuOne Beautiful work on those upper links. A local guy, called R2 here on Rcc, did the exact same thing with his XR10 upper links. I think he said they could take a 30kg load lenghtwise before either rod end would break loose from the cf tube. |
Re: Haastnooit's AXR10 2.2s NCD SuDuOne Quote:
Quote:
The 30kg number got me thinking about making a CF draglink and tierod if needed .... same method but with a pin added. Also got some 5mm tube ... what do you guys think, can it work ? Or will the CF not withstand any contact with rocks ? |
Can you make me some in the future? send from my HTC One-X |
Re: Haastnooit's AXR10 2.2s NCD SuDuOne Quote:
|
Re: Haastnooit's AXR10 2.2s NCD SuDuOne Hi, Quote:
Pic after tests of traction :mrgreen: http://img441.imageshack.us/img441/6...ouillat015.jpg http://img545.imageshack.us/img545/3...ouillat016.jpg I use the same CF link on my crawling since more than one year and they resisted very well. They are always in place |
Re: Haastnooit's AXR10 2.2s NCD SuDuOne Very nice work on the cf links. |
Re: Haastnooit's AXR10 2.2s NCD SuDuOne @ TotoRax: Those are the pics that convinced me in under 1 second .... :twisted: @ 63comet: Thanks man ... "thumbsup" |
Re: Haastnooit's AXR10 2.2s NCD SuDuOne Very clean work "thumbsup" Keep up the awesome job! Rob |
Re: Haastnooit's AXR10 2.2s NCD SuDuOne Thanks Rob … I will keep going at it …. "thumbsup" I have been fondeling the chassis somewhat this afternoon, and watch how the links move when articulating. I noticed some minor flex in the rear 4-linkmount, it is caused by raising the little delrin pieces with the revo balls. To counter this I added a 28mm long aluminium spacer between the delrin pieces. It is made out of a old Axial aluminium link, so diameter is 6mm … de-anodized it offcourse 8). http://i1123.photobucket.com/albums/...psf6451f47.jpg That makes it feel waaaaaaay more rigid !! "thumbsup" Tomy is working on some bigger delrin blocks with a added row of holes. Those will allow the screws to have more thread in the delrin pieces as to the current setup. And with the bigger footprint on the CF plate the taller pieces should be stable enough by it self … in case you need to …. you can always add the spacer :mrgreen: |
Re: Haastnooit's AXR10 2.2s NCD SuDuOne What body are you going to use? Rob |
Re: Haastnooit's AXR10 2.2s NCD SuDuOne I am going to run a Parma Xciter ... |
Re: Haastnooit's AXR10 2.2s NCD SuDuOne Quote:
Rob |
Re: Haastnooit's AXR10 2.2s NCD SuDuOne Those are very cool ... I got 2 Xciters for this rig "thumbsup". One for show and one to do work ... First one is painted by RockThrasher and I got a unpainted body sitting here ... if we can work out something, I will be more then happy to run the KK inside skinz on the work body "thumbsup":mrgreen: |
Re: Haastnooit's AXR10 2.2s NCD SuDuOne Loving this build, will be my bible when I get my SuDu, what lowers are you using on the scx shocks look different to mine? |
Re: Haastnooit's AXR10 2.2s NCD SuDuOne Thanks FesterUK "thumbsup" Those are the stock Axial ends for the SCX10 shocks, they only look different because of the black external limiter sitting on top of it. For external limiters I like using the Traxxas bushing used to mount the bigbores on the Traxxas vehicles. They are stepped and therefore work very nice with JeepinDoug springcups ...length is 7.5mm. Here is a pic of the SCX10 shocks of my SA3.5 that shows them better ... http://i1123.photobucket.com/albums/...117_resize.jpg |
All times are GMT -6. The time now is 09:45 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com