* Fat Dog Tuber + Poulson + MSD Beadlocks * = a bad azz tuber project. As if I need another project.:roll: Here it is: - Fat Dog Tuber - Poulson Axles " AMAZING ""thumbsup" - AX-10 tranny and guts - MSD Rock Solid Beadlocks " TOP GUNS " - Losi Rock claws - Revolver 1 and mamba 25 from HH - 8 cell saddle pack 2/3 cells pics : THIS - http://www.nor-calrcrc.com/albums/album67/aaa.sized.jpg PLUS THIS - http://www.nor-calrcrc.com/albums/album67/aab.sized.jpg PLUS THIS - http://www.nor-calrcrc.com/albums/album67/aad.sized.jpg = THIS ----"thumbsup" http://www.nor-calrcrc.com/albums/album67/aaf.sized.jpg http://www.nor-calrcrc.com/albums/album67/aae.sized.jpg http://www.nor-calrcrc.com/albums/album67/aac.sized.jpg |
:shock:"thumbsup" |
I'll watch this! I like the axles. How do they hold up. I am assuming there are aluminium spools inside the casings. How do the gears inside there do? If ya know!!:lol: |
WOW that is saweet, looks like one of the UTRCRC guys rigs from Nats. Those tubers all worked very well. |
Geez, how much clearance do you have under those axles?:shock: Threadjack ! What ever happened to your Gimbal tuber? |
Quote:
It is on the shelf, not to worry.;-) |
Those axles are amazing that tuber is going to wicked when It's done. How light or heavy are those axles "thumbsup" |
Quote:
ben your part of the few. the rich. the special. people that own these"thumbsup" |
:shock: another project??? What the other 5 wasn't enough?? looks good though"thumbsup" |
Quote:
|
Quote:
Sorry Unimog for gumming up the thread. I think the axles are sweet. This is going to be a nice build!"thumbsup" |
Ben, I hope you like the chassis and it works well for ya;-) this is going to be a saweet build asshole... Racer4life-You have to run a slipper on your tranny with these axles...It will help save your gears and CVD's... And I have only seen 1 gear set strip in these axles...They are AMAZING, I have a set waiting for a chassis"thumbsup" |
Quote:
|
Thats ridiculous. Honestly amazing... |
sweet set-up Ben, I cant wait to see it finished:) |
Oh boy!!! We get to see another build in that "crappy" shop of yours..... sheesh :roll: |
Is it just me, or are those axles just begging for a torsion chassis? Grind the Link Tabs off out by the knuckles, fab up a nice BTA steering setup... never mind, they look fantastic with that chassis. |
Nice work Ben can't wait to see this rig in May. How the little one coming here yet? |
Nice Ben...real nice"thumbsup" |
Quote:
If you bind it up hard with brushless power, you will strip them. However, why bind the rig up that hard? If it's bound up hard enough to strip the gears, it's not a situation where you're going to drive it out anyways? I'm all for testing the limits so you can see how hard you can push the rig before it will break, but after you know, you wouldn't keep breaking it just to break it, right? As for the solution to the "problem," run a tranny w/ a slipper. Lock the slipper down nice and tight so that it only slips right before the axles would break. That's what pretty much everyone locally running these axles does. It works too. I've seen more broken CVD bones with these axles than I have ring and pinions. I don't know if that's because they're the weak point torque-wise or if it's because they get bent on a hard tumble and then snap at the bend via torque...but they've proven to be the "weak link" in the drivetrain. That said, everyone who runs the axles absolutely loves them and considers them to be worth every penny they cost. I want to pick up a set one of these days...if I ever find money... |
Looks good man cant wait to see this one finished Ive always loved those axles. |
Geeze this thing is going to be sweet Ben."thumbsup" |
That is looking sweet! Those axles are looking good also! |
Those axles are awesom, looking forward to the rest of this build "thumbsup". |
How do you go about buying a set of these axles? I did a search with not much coming up as a purchase point. |
Quote:
www.mpcrawlers.com |
Ooooo Ben this is going to be sweet "thumbsup". Quote:
www.mpcrawlers.com Yes they run plastic gears I've stripped 2 of them but it was because I had them shimmed wrong. After I got them shimmed right I have not had any problems with the gears. I have broken a few bones but in the few cases I think I would've broken my TLT's also. I love these axles. After running these axles I could never go back to a standard axles Here is a link to my build on these axles http://www.rccrawler.com/forum/general-crawlers/77179-nazts-new-tuber-agent-j.html |
Looks awesome Ben, cant wait to see progress on this "thumbsup" |
Ben, OMG.... OK so I'm envious Poulson axles....Fat Dog tubes.... to bad you couldn't find a descent set of wheels to fit up this truck. :shock: Just kidding that's what envy does to people. :lol: Looks like no slipper clutch is being planned for this rig? Can't wait for the rest of this build so get busy right after you get my new wheels in the mail. "thumbsup" |
Thanks Norm, they are on the way."thumbsup" |
tranny is in, lower links are on, servo and steering done and the shocks showed up today. better get to work tonight. |
Quote:
|
Jaw hits floor, ADD and Tourettes kick in walks away but still wants more. *($@ |
Still waiting...MSD the official wheel of Fatdog"thumbsup"...What a combination8) |
Quote:
I'm in. better send you some more stickers:lol: |
Ben, I can help fix you up with an B4 slipper for the Axial trans. I just did one for another Axial\Poulson rig and it came out pretty good. Mike |
Ben If you remove the bottom king pins from the steering knuckles the axle will sit flat. Then set the chassis on 1.25" block. You can set up the links and shocks and it will give you the ride height you were talking about. Mike |
thanks Mike, will do, slipper is great btw."thumbsup" should be a roller tomorrow, having a baby slowed me down. :) |
Very cool Ben! I like the new aluminum axle brace on the pulsons |
Looking really good Ben"thumbsup" i can't wait for my axles to show up now. |
All times are GMT -6. The time now is 02:24 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com