48 pitch 11 tooth pinion gear?
 

Hello friends, I want to swap out the stock 14 tooth pinion gear for a 11 tooth pinion gear in my Capra, but try as I might I cannot find one that is 48 pitch. I see that there are plenty of 32 pitch pinion gears available. Can I use a 32 pitch 11 tooth pinion gear in the Capra?

Re: 48 pitch 11 tooth pinion gear?
 

The Capra takes 32 pitch pinion , I have an 11 tooth and it’s perfect imho for my setup.

Re: 48 pitch 11 tooth pinion gear?
 

Well if for some reason you do happen to need 48P RRP makes an 11T
https://www.rpphobby.com/product_p/rrp1411.htm

Re: 48 pitch 11 tooth pinion gear?
 

It's 32 pitch? Huh, on page 23 of the online manual it lists AX30569, which is a 48 pitch 14 tooth pinion gear. I'm so confused. Did they switch to 48 pitch gears at some point or vise versa?

Re: 48 pitch 11 tooth pinion gear?
 

I dont have a Capra but looking at parts it does appear to be 48P

EDIT: hmmm I'm confused now too looking at the gear set most are 48P but the spur does look like 32P https://www.amainhobbies.com/axial-c...2/p1049129?r=0

Open it up and check?

Re: 48 pitch 11 tooth pinion gear?
 

This is what I am using
AXI30722
Axial 32P Pinion Gear w/3mm Bore (11T)

Re: 48 pitch 11 tooth pinion gear?
 

Pinion gears aren't that expensive. I'll give a 32 pitch a try and if it doesn't work I'll get the 48 pitch.

Thank you guys for your insight and assistance.

Re: 48 pitch 11 tooth pinion gear?
 

Trust me , it’s 100% 32 pitch