|
| LinkBack | Thread Tools | Display Modes |
01-21-2024, 04:59 PM | #1 |
Pebble Pounder Join Date: Jun 2009 Location: Santa Cruz Mountains
Posts: 112
| Quick Capra Rebuild before KOH
So I figure I’d post my re-rebuild on my original RTR Capra I picked up when they first came out. Side note, I just picked up a Vanquish VRD Carbon, and I told myself I’m not going to build it till I dial in my Capra. The Capra was only used indoors for a few hours, the I tore it apart and put it my old Novak Goat 3S system I had sitting around. After fully dialing it in, I was not happy at all with the low end cogging, so I parked it for a few years. I’m a little bummed to tear it apart, cause I wired it up really cleanly. Rebuild stats after pulling the RTR items: Servo, Savox SG-2290 at 8.4V with Castle BEC and Treal Mount Novak Sensored Bruahless 18.5 with Goat 3S Speed Control Vanquish Methods, Crawler Innovation Foam, with 1.9 Hyrax Predator Treal Brass front knuckles and portal boxes, rear Treal Portal boxes Battery, ProTek HiLV 4,100 3-Cell The new build I’m going to keep all the Treal parts and battery but am switching to: Reefs 777 running at 11.1 powered off the balance port of the battery. HobbyWing Fusion Pro 2300kv Tires and Wheel, Proline Baja Pro X tires G8 compound, and Proline Bead locks. I think this will be a basher crawler, and I’ll rebuild the Vanquish wheels for the VRD. I think this rebuild will clean up a ton of the wiring and should be easier to tune. Pics coming in an hour or so… I’m going to reuse the 13T pinion. Tight fit, had to shave the UCA Mount a little, and I think I will need to move the links to the middle position. Pics of the roached Hyrax’s Last edited by Diablo169; 01-21-2024 at 07:16 PM. |
Sponsored Links | |
01-21-2024, 05:28 PM | #2 |
I wanna be Dave Join Date: Jan 2016 Location: california under the rock im crawling on
Posts: 4,289
| Re: Quick Capra Rebuild before KOH
as much as I hate to say it that Novak esc is gonna suck compared to today's esc the last 5 years alone they have made huge improvements
|
01-21-2024, 11:26 PM | #3 | |
Pebble Pounder Join Date: Jun 2009 Location: Santa Cruz Mountains
Posts: 112
| Re: Quick Capra Rebuild before KOH Quote:
Yeah, I’m hoping. That Novak setup was probably over 10 years old. The Fusion seems pretty nice, and appears decent quality. Sent from my iPhone using Tapatalk | |
01-22-2024, 09:42 AM | #4 |
Moderator Join Date: Sep 2008 Location: PA
Posts: 13,937
| Re: Quick Capra Rebuild before KOH
Wow I can't believe those tires! Where did you store them?
|
01-22-2024, 10:04 AM | #5 |
RCC Addict Join Date: Jan 2019 Location: Corvallis, OR
Posts: 1,564
| Re: Quick Capra Rebuild before KOH |
01-22-2024, 10:59 AM | #6 |
Moderator Join Date: Sep 2008 Location: PA
Posts: 13,937
| Re: Quick Capra Rebuild before KOH |
01-24-2024, 09:45 AM | #7 | |
Pebble Pounder Join Date: Jun 2009 Location: Santa Cruz Mountains
Posts: 112
| Re: Quick Capra Rebuild before KOH Quote:
I was pretty surprised to see them deteriorate so quickly, but, they are over 3 years old. Side note, as soon as I get the link to work I can upload more pics. | |
01-24-2024, 02:59 PM | #8 |
Moderator Join Date: Sep 2008 Location: PA
Posts: 13,937
| Re: Quick Capra Rebuild before KOH I don't think that would have happened to G8 tires even at 3-years old. Garages do get hot as hell, but still the tire shouldn't look like this IMO.
|
01-24-2024, 07:22 PM | #9 | |
I wanna be Dave Join Date: Jan 2016 Location: california under the rock im crawling on
Posts: 4,289
| Re: Quick Capra Rebuild before KOH Quote:
my redcat tires do it too and also the axial r40 compound j concepts don't seem to crack mine are at least 7 years old and no cracking also axial r35 hold up pretty good my yeti xl tire are original and hardly ever gets run and no cracking and my 3.2 ripsaws are fine and my 1.9 trupidores are still good pitbull alien compound cracked but the older compound tires didn't I've had good luck using ic2000 to glue them back together to get a little more life out of them i had a set of austar crock tyre lol that came cracked out of the package Last edited by ferp420; 01-24-2024 at 07:25 PM. | |
01-25-2024, 07:10 AM | #10 | |
Moderator Join Date: Sep 2008 Location: PA
Posts: 13,937
| Re: Quick Capra Rebuild before KOH Quote:
Good to know about IC-2000. E6000 is some good stuff as well. I've used that to glue monster truck tires to the wheels and apparently you can pull it off and reuse the wheels and tires. | |
01-25-2024, 11:11 AM | #11 |
Pebble Pounder Join Date: Jun 2009 Location: Santa Cruz Mountains
Posts: 112
| Re: Quick Capra Rebuild before KOH
Well I’m trying to rebuy my Star so that I can post pics, but the PayPal link doesn’t seem to work. But the Capra is all back together and runs really good with the Fusion Pro. I did purchase an 11t pinion as I think it needs a little smooth crawl. I probably could adjust that on the ESC and the remote, but wheel speed on 3s seems a little fast. Also the dig servo is fully dialed in at 3 positions. 4WD, Free rolling rear, and locked rear. Once I figured out what I was doing in the DX5C it was pretty easy. I was struggling with realizing that the center position is the Trim, and the other positions just need the end limits set. It’s all ready for the Hammers, I think the G8 compound Micky’s should be good for dirty courses. I hope Axial has there booth and RC track set up again this year. I like the idea of gluing the tires to get some more life out of the Hyrax’s. I think for the VRD build I’m going to try the JConceps Megalithic. Not sure yet on foam or gel. |
01-25-2024, 12:15 PM | #12 |
I wanna be Dave Join Date: Jan 2016 Location: california under the rock im crawling on
Posts: 4,289
| Re: Quick Capra Rebuild before KOH
axial r40 although I haven't had my newest set vary long I think axial stoped using r40 10 years ago but here they are 3 sets of proline tires pitbull alien and redcat sorry for the thread jack lol hammers is a muddy mess and the rocks are slick Last edited by ferp420; 01-25-2024 at 12:20 PM. |
Quick Capra Rebuild before KOH - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
VFD Capra...Can I Still Call It A Capra? | mjensen | Axial Capra | 107 | 11-20-2021 03:56 AM |
California Gun owners. Quick question, need a quick answer. | Szczerba | Chit Chat | 8 | 11-23-2010 12:35 AM |
Bully Axle rebuild - Quick Question | mcho78 | RC4WD Bully | 12 | 12-02-2009 10:51 PM |
| |