bumper mounts Broke down and bought a cgr the other day with a set of proline bumpers. I was wondering how you guys are mounting the bumpers. Pics would be nice, thanks.... |
I've monted mine a couple diferent ways since I built my rig here is the link! Hopefully this helps. The first way I did it was with some flat aluminum and some angled "L" shaped aluminum. I made a plate from the flat aluminum to bolt the bumper too then I basically drilled holes in the exhisting cross members. That proved to be waay to flexy for my liking specially using the winch so I added some angle alum. to trap the crossmember a little better but it still flexed too much then I did it the way it shows on my build that way is rock solid! I have broken the D-Ring mount off the back, and have scuffed the hell out of the front since now there is no give. Those bumpers aren't the strongest! http://www.rccrawler.com/forum/axial-scx-10/183784-scx10-project-class-two-cherokee-trail-rig.html |
All times are GMT -6. The time now is 10:22 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com