05-29-2011, 12:00 AM | #1 |
Pebble Pounder Join Date: Jan 2009 Location: Australia
Posts: 117
| Sut
Here is my Nikko hummer h2 Sut on my scx10 took out wheeling today body lines up perfect with the scx10 wheel base let me know what you think Last edited by colin1986; 06-17-2011 at 08:17 PM. |
Sponsored Links | |
05-29-2011, 12:39 AM | #2 |
I wanna be Dave Join Date: Jun 2007 Location: Arlington wa
Posts: 2,100
|
needs some tube work and trim the fenders... i hate hummers until MG got his blue star.. good work bro |
05-29-2011, 05:53 AM | #3 |
Pebble Pounder Join Date: Jan 2009 Location: Australia
Posts: 117
|
thanks
|
05-29-2011, 07:35 PM | #4 |
Quarry Creeper Join Date: Nov 2010 Location: land of no rocks
Posts: 438
|
looks good. but i would lower the body down just a bit if you can. |
05-29-2011, 07:41 PM | #5 |
Pebble Pounder Join Date: Jan 2009 Location: Australia
Posts: 117
|
i have tried to lower it but it wont go any lower i am going to remove the rear bumper and see if it will go lower as the rear of the hummer is stopping it going lower for some reason
|
05-29-2011, 10:04 PM | #6 |
I wanna be Dave Join Date: Jan 2006 Location: Corruptifornia
Posts: 12,107
| |
05-30-2011, 02:46 AM | #7 |
Pebble Pounder Join Date: Jan 2009 Location: Australia
Posts: 117
|
ok will give it a try
|
05-30-2011, 04:38 PM | #8 |
Quarry Creeper Join Date: Nov 2010 Location: land of no rocks
Posts: 438
|
if you should be able to get the rear bumper in line with the frame. i was able to do it with my h2. i also built a bracket to use as a body mount that was bolted into the h2 rear bumper and the chassis. it also hindged for easy access under the body. with the body that low i still had room for the rok loxs with just a little rubbing.
|
05-30-2011, 05:51 PM | #9 |
Pebble Pounder Join Date: Jan 2009 Location: Australia
Posts: 117
|
thanks its a cool idea i will have a go at sorting out the ride height today
|
| |