Binare's 73 Bronco May as well make my first post something useful ;) This is my first scaler, actually my first electric too, been interestin so far hehe. It was the Tamiya Bronco body that sold me on gettin a scaler in the first place, the scx10 seemed like the perfect platform so off I went shopping and hacking, and cutting, and hacking some more. The used scx10 I picked up had a 3racing winch and Proline Western bumpers already, But I didn't like how big the front one was, after lots of filing and cutting I got it down to a more scale size for the body I think. Had to ditch the cheesy proline rack and pickup a 3racing one as well, think it looks alright. spare tire is a Flatiron but the trucks sittin on RC4WD true scales wrapped in rock stompers. http://i771.photobucket.com/albums/x...o/IMG_1328.jpg http://i771.photobucket.com/albums/x...o/IMG_1329.jpg http://i771.photobucket.com/albums/x...o/IMG_1330.jpg http://i771.photobucket.com/albums/x...o/IMG_1331.jpg http://i771.photobucket.com/albums/x...o/IMG_1332.jpg 645MG mounted on the front axle, rebel 2, rx and winch control mounted to the servo. http://i771.photobucket.com/albums/x...o/IMG_1333.jpg Moved the front crossmember forward, can see the top of the front bumper bracket I made attached to it. http://i771.photobucket.com/albums/x...o/IMG_1334.jpg Didn't like the blue anodizing on the true scales, de-anodized em and shot flat black. http://i771.photobucket.com/albums/x...o/IMG_1335.jpg Mirrored the tranny (was bored I guess) and mounted a 55T Tekin. Only green thing left are those two rear upper links. http://i771.photobucket.com/albums/x...o/IMG_1336.jpg Rear bumper bracket mounted to the rear cross member just the like front. moved all my crossbracing to the upper shock towers. Battery in the back, I really got no where else to put that sucker on this thing. For now im just running a 1200 mah Traxxas battery. soon ill bite the bullet and go lipo. http://i771.photobucket.com/albums/x...o/IMG_1337.jpg Did NOT want holes in the body, so I came up this top heavy, velco mount with some leftover alumimum. Its way more complicated then it needs to be, but she works. http://i771.photobucket.com/albums/x...o/IMG_1338.jpg Layer of black vinyl under the velco on the body, to protect the paint. I can toss this thing around by the body without anything movin, happy with it, minus the weight. http://i771.photobucket.com/albums/x...o/IMG_1339.jpg Still gotta do the lights, clean up the wiring and add some scale goodies. Resisting the urge to pickup an 35T fxr combo which im losing badly I think! Other then, lemme know what ya think. Cheers "thumbsup" |
Nice truck!!! I like the bumpers mounts :) Why don't you put the NiMh battery pack in front? |
I've tried and tried, but with my current it aint possible. Ill have another go at it when I get the fxr, don't wanna spend too much time on extending wires if its all gonna change. Same deal with waterproofing, ill wait ill I get the eq I want in er. Thanks for the props mate. |
Looks great "thumbsup" I got one of thosse bodies just sittin around somewhere. After lookin at yours I might have to dig it out and out it together. Once again looks great. |
Thanks, fan of yours as well. Hackin up the frame wasn't that bad, fittin bumpers and crap was time consuming. I was lucky had got tons of links with the scx when I got it. More or less went together like lego, big fan of this chassis so far. |
can someone tell me what the wheelbase is of the tamiya bronco. |
Looks good man. I am in the process of starting my SCX-10 Bronco as well. Next up is cutting the chassis. I have the links all done. Just gotta paint, cut, and drive. LOL.. Nice job. |
Quote:
|
Yes. Plus one for bronco builds! Nice looking rig |
thanks for the props guys "thumbsup" maybe my quality will reach the rest of ya someday. Pick a few brains while im at it: I got a full set of flatirons, i see most people run em, is it becuase thats what these scx10s seem to come with? or are they maybe a better then the rock stompers? I dread all those tiny ass screws, figured I'd ask before I tried em out. I'd hate to drill these true scales, so not runnin any foams for now, just air. Cheers |
Got a few goodies done tonight. Got my head and taillights done. I used to black vinyl again to keep to the wires nice and tight to the body. Also figured out I get 6 volts from the bind plug on my receiver, just made a simple harness to plug in to it with a Deans micro on one end and a jst on the other, then I just plug the body in if I want the lights on. http://i771.photobucket.com/albums/x...o/IMG_1340.jpg http://i771.photobucket.com/albums/x...o/IMG_1347.jpg http://i771.photobucket.com/albums/x...o/IMG_1349.jpg Made up a license plate, for sale sign, couple recovery straps and some bungee cords just for shites. Nothing new, nothing special ;) http://i771.photobucket.com/albums/x...o/IMG_1346.jpg http://i771.photobucket.com/albums/x...o/IMG_1345.jpg http://i771.photobucket.com/albums/x...o/IMG_1348.jpg http://i771.photobucket.com/albums/x...o/IMG_1350.jpg http://i771.photobucket.com/albums/x...o/IMG_1343.jpg I still need to get this biatch dirty! |
"thumbsup""thumbsup" I give it that. again i said awesome build!!! |
All times are GMT -6. The time now is 10:46 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com