| |
09-08-2010, 08:34 PM
| #1 |
| Rock Crawler  Join Date: Apr 2006 Location: Hartland, MI
Posts: 788
|  Wiring LEDs
I ordered the Axial LED kit, but was wondering how I would run it off a 9V battery rather than the pack for the truck. I'm sure its pretty simple, but thinking someone knows how to do it right.
|
|  |
| Sponsored Links | |
| | |
|
09-10-2010, 09:11 PM
| #2 | |
| Newbie Join Date: May 2010 Location: Ft. Lewis
Posts: 42
| Quote:
 | |
|
| |
|
09-10-2010, 11:24 PM
| #3 |
| Rock Crawler Join Date: Aug 2008 Location: Wine Country
Posts: 899
| When u get it just hook it to a radio shack 9v plug. You still have the on/off switch so it should be easy. Just remember to plug in both the throtle and steering wires or it blinks on you. Have fun with it. |
|
| |
|
09-11-2010, 04:55 PM
| #4 |
| Newbie Join Date: Sep 2010 Location: Detroit
Posts: 46
|
first you need to goto radioshack or a electronics store and pick up one of these bad boys  then you take the plug on the NVS for the power, cut it of and then solder that plug on there. red to red and black to black, and bam. your good to go. |
|
| |
|
09-12-2010, 08:36 AM
| #5 |
| Rock Crawler Join Date: May 2008 Location: Sumter, SC
Posts: 619
|
Or you could install a switch for the lights so you can just switch them on when you want them. Just another option for you!
|
|
| |
 |
| |
Linear Mode
