05-17-2012, 08:52 AM | #1 |
Pebble Pounder Join Date: Dec 2010 Location: Canada
Posts: 99
| Scx-10/wideners
I have a question about these wideners https://store.rc4wd.com/mobile/product.asp?itemid=273 I am running an SCX-10 with rc4wd 1.9 steel rims and stock axles, I have axial aluminum c-hubs and knuckles and I would like to know of they with fit as is. The ad says "will fit any 12mm hex" but because it is for 2.2's I wonder will there be enough room in my 1.9 rim? Says it will fit the AX-10 but no mention of SCX/1.9, if anyone has done this or knows if it will fit or not I would love to hear about it. Thank you |
Sponsored Links | |
05-17-2012, 12:31 PM | #2 |
Quarry Creeper Join Date: Mar 2011 Location: over there...
Posts: 336
| Re: Scx-10/wideners
Id say it looks like they would fit but do you really need that much ? I just ordered a set of 4 hexes from rpp hobbies called j fab 8mm wide so that's 3mm bigger per side they cost 12bucks for 2 ..tcs crawlers also has some wide losi hexes but they don't describe the size so i didn't what to bet on it but there half the price ..
|
05-17-2012, 05:20 PM | #3 |
Quarry Creeper Join Date: Feb 2011 Location: Austin
Posts: 414
| Re: Scx-10/wideners
I would spend the money on long beef tubes. You'll get the extenion you are looking for and near bulletproof axles.
|
05-17-2012, 07:36 PM | #4 |
Pebble Pounder Join Date: Dec 2010 Location: Canada
Posts: 99
|
Well yes I would like more then 3mm each side, both for look and for functional side bite. I don't know how much those beefy tubes are, but the mini 12mm wideners are only $25
|
| |