Go Back   RCCrawler Forums > Scale Rigs Brand Specific Tech > Axial Brand Scale Rock Crawlers > Axial SCX-10
Loading

Notices

Thread: Mirror tans on Dingo kit - spur gear cover, etc.

Reply
 
LinkBack Thread Tools Display Modes
Old 09-16-2012, 06:06 AM   #1
Rock Stacker
 
Join Date: Oct 2007
Location: MD, USA
Posts: 65
Default Mirror tans on Dingo kit - spur gear cover, etc.

Can I morror the tans on Dingo kit w/ gear cover and cover rear plate?

Just about to try to do this. I've already done the original SCX w/o gear cover, but before I get started, thought I'd check w/ you guys.
DudeWalker is offline   Reply With Quote
Sponsored Links
Old 09-16-2012, 10:59 AM   #2
Pebble Pounder
 
Join Date: Aug 2011
Location: England
Posts: 143
Default Re: Mirror tans on Dingo kit - spur gear cover, etc.

measure it up, see if you have enough room. I know I can't run the cover because it interferes with my body/interior. Have a play
George014 is offline   Reply With Quote
Old 09-16-2012, 12:24 PM   #3
RCC Addict
 
AddictedtoRC1's Avatar
 
Join Date: Apr 2012
Location: Williamsport, PA
Posts: 1,360
Default Re: Mirror tans on Dingo kit - spur gear cover, etc.

If you mirror the tranny the gear cover won't line up witht he holes in the case. Might as well use it for a screw dish or toss it in the trash.
AddictedtoRC1 is offline   Reply With Quote
Old 09-16-2012, 03:10 PM   #4
Rock Stacker
 
Join Date: Oct 2007
Location: MD, USA
Posts: 65
Default Re: Mirror tans on Dingo kit - spur gear cover, etc.

Thought so... Thanks
DudeWalker is offline   Reply With Quote
Old 09-16-2012, 05:22 PM   #5
Rock Stacker
 
Join Date: Feb 2012
Location: Colorado
Posts: 55
Default Re: Mirror tans on Dingo kit - spur gear cover, etc.

Just built my Dingo kit and no it won't fit. but mirroring the tranny is smart just be careful with the reverse throttle when going down hill the torque twist will send you into a major roll.
01_DiscoII is offline   Reply With Quote
Old 09-16-2012, 08:57 PM   #6
RCC Addict
 
AddictedtoRC1's Avatar
 
Join Date: Apr 2012
Location: Williamsport, PA
Posts: 1,360
Default Re: Mirror tans on Dingo kit - spur gear cover, etc.

Quote:
Originally Posted by 01_DiscoII View Post
Just built my Dingo kit and no it won't fit. but mirroring the tranny is smart just be careful with the reverse throttle when going down hill the torque twist will send you into a major roll.
That's what drag brakes are for.
AddictedtoRC1 is offline   Reply With Quote
Reply



Mirror tans on Dingo kit - spur gear cover, etc. - Similar Threads
Thread Thread Starter Forum Replies Last Post
Spur Gear cover mount? johnnyh66 Formula Offroad 17 08-20-2011 08:52 AM
Axial Spur Gear Cover Help jeepster73 Newbie General 2 06-22-2011 12:23 AM
spur gear cover/guard? axialnut Axial SCX-10 2 02-22-2011 08:40 AM
Spur gear cover needed! TrailDawg362 Axial SCX-10 5 07-25-2009 05:12 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 08:37 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com