Clod Buster body fitment
 

I am wanting to get a body for my scx-10 honcho. MY question is how does the body fit the stock wheelbase, length and width wise?

TowerHobbies.com | AdvancedSearch Results

I like the look of this body alot but dont want the wheels sticking out, because the body is too narrow. Any help?

Re: Clod Buster body fitment
 

The wheelbase on the clod is about 10 3/8 inches and is 7 1/8 wide at the middle of the fenders. Hope that's helps if you want more measurements let me know I have a clod body sitting here.

Re: Clod Buster body fitment
 

Thank you, are you using it on a scx 10? What wheelbase are you using? Also what is the width of the front "fender"? outside to outside where a bumper wold go?

EDIT: I have been browsing around looking for info on these. also seems that 1.9 tires are too big for the fenders?

Re: Clod Buster body fitment
 

Mine is on a homemade chassis and I set my wheelbase at 10 1/4. Where the bumper would go is 6 7/16 outside to outside of the front fenders. I took some pics on the frame I made for it and it has 1.9 flatirons and some on my Dingo with 1.55 rock stompers which are the same height.
full flex
http://farm9.staticflickr.com/8234/8...5d6692ac31.jpg
image by ratrodfanbobcat, on Flickr

dingo chassis

http://farm9.staticflickr.com/8520/8...a0d49d1ca4.jpg
image by ratrodfanbobcat, on Flickr

http://farm9.staticflickr.com/8381/8...bdc14dcffc.jpg
image by ratrodfanbobcat, on Flickr

Sorry my internet connection sucks so I had to take the pics with my phone and they're kinda dark and hard to see but hopefully they help.

Re: Clod Buster body fitment
 

Cool, this helped me alot. Thank you for your help.

Re: Clod Buster body fitment
 

What do I need to change on my scx10 so that my clod buster body fits the wheel base?

Re: Clod Buster body fitment
 

The length of the lower links changes your wheel base. You will also need to change the length of the upper links to keep the driveshaft angles in check...