|
NorZepol's JK Kit 22 Attachment(s) Well, got a kit a while back, thanks RPP! It is mostly stock but that will change with time. As of now upgrades include; Vanquish OMF 1.9s w/ Crawler Innovations foams, Pitbulls and Rogue Elements Nuts/hubs, Holmes Hobbies Waterproof SC w/ HH Torquemaster Expert 35T motor, MIP driveshafts, Hand Bros. CMS Mount, 3Racing winch, all metal suspension links and a home made battery mount and fender wells. Here's some general pics. Attachment 234553 Attachment 234554 Attachment 234555 Attachment 234556 Here is a few interior picks. I actually cut out the "cloth" inserts and seatbelts to give a little different look by contrasting against the dull cote I applied to the interior. Also showing the Rogue Elements fuel cell insert. Attachment 234557 Attachment 234558 Attachment 234559 Chassis shot Attachment 234560 Undercarrige Attachment 234561 Rear fenderwells Attachment 234562 Front fenderwells Attachment 234563 Electronics Attachment 234564 Relocated the stock electronics box to the rear. It seems as though it was meant to install in this spot, just flipped the crosmember with the "x" and the box bolts right in, then trim the rear bumper mounts to clear. The end result actually looks like a gas tank from the bottom. Be sure to seal up the 2 holes in the bottom of the box"thumbsup" Attachment 234565 Decided to make a front battery mount until I can get the one I saw on RPP's site. First pic is the raw parts I made out of some scrap aluminum angle. I have not had a chance to see if the balance is going to affect performance since the battery is not centered, we'll see. Attachment 234566 All battery mount parts needed Attachment 234567 Battery mount assembled Attachment 234575 Attachment 234569 Front brace mounts to 2 existing holes Attachment 234571 Attachment 234572 Mount installed Attachment 234570 Battery installed Attachment 234573 Wheel / Tire Combo Attachment 234576 More to come when more $$ is available"thumbsup" |
Re: NorZepol's JK Kit I love the green and the mod for the rear lights! |
Re: NorZepol's JK Kit Quote:
|
http://img.tapatalk.com/d/13/04/16/uze9yvyq.jpgHere is a pic of mine...;-) |
Re: NorZepol's JK Kit Quote:
|
Re: NorZepol's JK Kit Looking good neighbor (Fresno). Did you have to trim up anything inside the bumper to mount the winch? |
Re: NorZepol's JK Kit Quote:
|
Quote:
The PSC sticker is custom made with a plotter. |
Re: NorZepol's JK Kit Quote:
|
If you have any questions about the JK kit,just ask... |
Re: NorZepol's JK Kit 12 Attachment(s) Quote:
First some DMG axle trusses, front and back. This front truss gave me some issues as far as hooking up the panhard bar, so it will be trimmed off to resemble the rear Attachment 239651 And some pics of the rear Attachment 239630 Attachment 239631 Attachment 239632 Attachment 239633 Attachment 239634 Next I added a Dinky RC swing away rack Attachment 239635 Attachment 239636 And last for now (until my R2j sliders come"thumbsup") a BGR Fab bumper. Here she is naked next to the stock bumper for comparison Attachment 239637 Here is a shot with the weight of the stock version Attachment 239638 And the weight of the BGR Attachment 239639 Quite a bit heavier but a lot stronger this bumper has some beautiful welds And here she is all painted up Attachment 239640 Well that's it for now, I will be installing the bumper in the morning and I'll post some pics, also will post pics of the R2j sliders when they arrive later this week"thumbsup" |
Re: NorZepol's JK Kit 3 Attachment(s) Got the front BGR Fabrication bumper with winch installed."thumbsup" Attachment 239789 Attachment 239790 Attachment 239791 |
| All times are GMT -6. The time now is 05:32 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com