GoSpeedRCer's Jeep JK Build (Slow Process)
 

What I've got so far..

Mad Skinz JK Soft Top
Gear Head RC Trail Rack "Long"
Gear Head RC Water Proof Trail Torch LED Light Bar
Custom Inner Wheel Wells (Inner fenders)
Snorkel (DSPro)
AXIAL JEEP RUBICON DOUBLE NATO CAN + TOOL MOUNT (DSPro)
2x 1/10 NATO JERRY CAN (DSPro)
Axial SCX10 TR Aluminum Links Upgrade Set (313mm)
RC4WD Bulldog 9300XT Scale Winch (Red)
HeyOK 2 pos Winch controller
RC4WD Jeep JK Rampage Recovery Bumper
Vanquish Products 1.9 OMF Beadlock W/ "Scaler Spiders" Wheels w/ .725 hubs
Axial Simple LED Controller w/LED lights (4 White and 2 Red)
R2j FSL-2 Rock Sliders
RC4WD King Scale Shocks (100mm)

Running a Venom 2S 25c 5000mah Lipo for now..

Plans:
VANQUISH Currie Front SCX-10 AX-10 Axle Silver
VANQUISH Currie Rear SCX-10 AX-10 Axle Silve
VANQUISH Currie/SCX Titanium 10 pcs. Link kit
Once I have $400+ extra to spend :shock:


On order:





Considering:

Re: GoSpeedRCer's Jeep JK Build (Slow Process)
 

Lookin Good, Ive neve seen a rack on over the Top before.. NIce work!

Re: GoSpeedRCer's Jeep JK Build (Slow Process)
 

(SEE NEW INNER FENDERS BELOW THIS POST)

Made some Inner Fender wheel wells! Thanks to Bender for the inspiration with the CD Top!!!! They still need paint and some sanding of the edges, these are going to look awesome! now for the rear..

More to come! "thumbsup"

http://i886.photobucket.com/albums/a...501_185752.jpg

http://i886.photobucket.com/albums/a...501_191601.jpg

http://i886.photobucket.com/albums/a...501_192112.jpg

Re: GoSpeedRCer's Jeep JK Build (Slow Process)
 

Nice jeep! I like that over the rack cover as well, very nice. Those wheel wells are a good idea too I might do em

Re: GoSpeedRCer's Jeep JK Build (Slow Process)
 

Looks good!"thumbsup" Nice to see that someone has taken my idea of a softtop :mrgreen: How ist this one monted? Is it just held by the roof rack? How have you mounted the roof rack? Have you done it the way like me on my Rubi_con_Arni?
cheers
Rene

Re: GoSpeedRCer's Jeep JK Build (Slow Process)
 

The Rack is just actually held on by some industrial Velcro that's not noticeable, especially when I have the spare tire up there, I also didn't feel comfortable with drilling through the rack it self, plus that way I can easily remove it if needed. The rack has not fallen off once through many roll overs! haha

http://i886.photobucket.com/albums/a...503_100537.jpg

The soft top is actually made by "scottanthony" it just mounts on the roll cage with some thin Velcro strips that came with it! it's 100% waterproof material and it protects my cage very nicely, not to mention looks B.A.! "thumbsup"

And yes, your rig has inspired this build quite a lot!

Now just for a top with side covers and windows!? (hint hint)

http://i886.photobucket.com/albums/a...503_100616.jpg

Re: GoSpeedRCer's Jeep JK Build (Slow Process)
 

Added a Tool Box... Thing.. Stores some tools that may be required for a repair on the trail.. It was an old "Tech Deck" Tool box,it opens on both sides. I think I'll paint it black to give it more of a scale appearance and maybe add a THULE decal to it somewhere, it doesn't effect performance much, but with a lot of stuff it makes it quite top heavy..

What do you guys think? size and usability? scale or meh? See first post for "action" shots

http://i886.photobucket.com/albums/a...509_234147.jpg

http://i886.photobucket.com/albums/a...509_234239.jpg

Re: New Inner Wheel wells!
 

So I completely did away with the CD Covers and went to Walmart to pickup some of these

http://i886.photobucket.com/albums/a...511_162059.jpg

They worked great, just had to cut off the part the lids snap onto, cut 2 of them in half and I was in business!

For the rear I just had to align them were I wanted with the body on and upside down (for ease of access remove the wheels and the top screw for the shocks and just let it hang) and just secure them to where the Shock screws in at the top, screwed it in and trimed any excess that was visible, did this for both sides. Now to remove and paint!

Here's the end result for the rears

http://i886.photobucket.com/albums/a...511_135140.jpg

The front was the same process, just had to trim them a bit more due to the way the jeep front end angles inwards. Again, remove and paint!

http://i886.photobucket.com/albums/a...511_135152.jpg

Finished top shot

http://i886.photobucket.com/albums/a...511_135213.jpg

Front End result

http://i886.photobucket.com/albums/a...511_135343.jpg

Rear end result

http://i886.photobucket.com/albums/a...511_135508.jpg

Nice, eh?

Re: GoSpeedRCer's Jeep JK Build (Slow Process)
 

looks good, this is one of the better setups I have seen. I may have to steal your idea.

Re: GoSpeedRCer's Jeep JK Build (Slow Process)
 

Thanks!

Go ahead! They only take about an hours time! 8)

Looks great I am going to have to try the inner fender trick. I also mounted my rack over my soft top. I had the rack first and I just got my soft top and didn't want to lose the rack so it's mounted over the top. I put little tiny screws thru the top and right in to the cage works great!

Sent from my SPH-L710 using Tapatalk 2

Update!
 

The other day I ordered up a Few accessories from DSPro! a Snorkel, 2x NATO Jerry Cans and the Dual can holder for my JK!

Also ordered the aluminum links, RC4WD Jeep JK Rampage Bumper and the Bulldog Wired Winch! :flipoff: Pics on the way of install once they arrive!!

DSPro goodies are in!
 

Look what arrived today! Can't wait to get them installed! "thumbsup"

DSPro Snorkel, 2x NATO Cans and the double holder for my Rubi!

http://i886.photobucket.com/albums/a...518_091419.jpg

Mounted!! "thumbsup"

http://i886.photobucket.com/albums/a...518_101210.jpg

http://i886.photobucket.com/albums/a...518_101244.jpg

http://i886.photobucket.com/albums/a...518_101315.jpg

http://i886.photobucket.com/albums/a...518_101450.jpg

Update! New Items in!
 

RC4WD JK Rampage Bumper with Bulldog 9300xt Combo! also put on some aluminum links!

http://i886.photobucket.com/albums/a...523_205657.jpg

http://i886.photobucket.com/albums/a...521_193832.jpg

New video being uploaded too! "thumbsup"

Re: GoSpeedRCer's Jeep JK Build (Slow Process)
 

New Video! Check first post! "thumbsup"

Action
 

First attempt at some "Scale" shots with new stuff! The DSPro Accessories are holding up nicely! 8)

http://i886.photobucket.com/albums/a...529_193828.jpg

http://i886.photobucket.com/albums/a...529_193655.jpg

Vanquish Products OMF 1.9 Beadlock Rims and GSRG's Rear Bumper Mod
 

New OMF Wheels with .725 Hubs! Also made some use of the old front bumper, what do you guys think?

http://i886.photobucket.com/albums/a...608_110543.jpg

http://i886.photobucket.com/albums/a...608_110814.jpg

http://i886.photobucket.com/albums/a...608_111051.jpg

http://i886.photobucket.com/albums/a...608_111213.jpg

http://i886.photobucket.com/albums/a...608_112953.jpg

http://i886.photobucket.com/albums/a...608_113039.jpg

Awesome idea with the rear bumper! What you re missing now is some swag by krawler konceptz!

Keep up the good work!

Re: GoSpeedRCer's Jeep JK Build (Slow Process)
 

What did you have in mind???

Attachment 242215
Here is a pic of my Jk.krawler konceptz is making awesome scale JK door handles,hood latches,tank cap and JK Grill. Attachment 242216Attachment 242217