2.2 Tires and Motor/Pinion hey guys i have some axial rock lizard tires on my SCX10 right now. They are a little over 5" tall. I have stock electronics and motor. My question is, what should i change to accommodate the 2.2 tires? Change the pinion gear? or change to a 55T axial motor and leave the 20T pinion gear? Thanks, other options are welcomed |
Re: 2.2 Tires and Motor/Pinion I'm assuming your gearing is stock, too? Pick up a good handful on pinions, 10T-16T. Just keep an eye on your motor and ESC temps. |
Re: 2.2 Tires and Motor/Pinion Quote:
|
Re: 2.2 Tires and Motor/Pinion Well what do you want? More speed or better climbing ability? |
Re: 2.2 Tires and Motor/Pinion Quote:
|
Re: 2.2 Tires and Motor/Pinion Do you have a 27turn or 20turn motor? Either way, it's do as suggested, pick up some motor pinions from 10t-16t and try them out. If you put in a 55turn motor, you'll want to upgrade your battery to a 3cell Lipo, but then you'll need new electronics. |
If you have a 20 or 27 turn in there now a 55t will really slow things down and gear you more towards just having just a crawler. I would try some different gearing first. Sent from my iPhone using Tapatalk |
Re: 2.2 Tires and Motor/Pinion ok i will try different pinions. What pinions will fit my scx10 because i see different style ones out there |
Re: 2.2 Tires and Motor/Pinion Quote:
|
Re: 2.2 Tires and Motor/Pinion Running 2.2 TSL's, Axial 55t motor w/ 20t pinion. Decent speed and climbs really well with tons of torque. Ran 27t motor with 14t pinion and it was pretty good, way more torque with the new motor though. |
Re: 2.2 Tires and Motor/Pinion For my daughter waith i changed the spur to 87 and the pinion to 14 with the stock motor and it has lasted over three years. I also put MT Claws on her rig which are 5.75 inches tall. |
Re: 2.2 Tires and Motor/Pinion Just went to the hobbie shop and bought a 14t pinion. I will install and see how it perform |
Re: 2.2 Tires and Motor/Pinion Spur Larger for slower speeds, Smaller for for faster speeds. Pinion Larger for faster speeds, Smaller for slower speeds. |
All times are GMT -6. The time now is 11:10 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com