novak SS+ brushless set up
 

so i put a novak Super Sport Plus esc and a SS5800kv brushless motor combo in my truck. the day i soldered everythin up, it worked great, it would stop for a second but all i had to do was give it a little nudge with my boot or go in reverse and itd kick bak on. yesterday went to go plug in my battery(2s lipo) and i get nothin. when i pull the throttle the green light comes on then the green light and blue light on the esc starts to blink and i get nothin even with nudgein it forward. them reverse is the same way, the green light blinks then the blue light comes on and the green and blue light blink and nothin happends. im not sure if it needs to be programmed, if the motor is burnt out or what. im runnin a 2.4ghz radio from a nitro exceed buggie. thanks for the help!

Re: novak SS+ brushless set up
 

http://teamnovak.com/file_download/1...tPlusInstr.pdf

According to that it's a possible ESC shut-down due to locked rotor detection. Return to neutral and check drivetrain for any binding.

Re: novak SS+ brushless set up
 

everything moves freely. i was thinkin if i took the motor apart and cleaned it, maybe there might be dust or something inside

Re: novak SS+ brushless set up
 

took it apart and cleaned it with compressed air. put it back together. didnt hook it up to motor mount and turned the truck on and started doin the same thinv. so must be a dead spot in the motor. or the motors junk