HD bevel gear set 43T/13T

[Honcho907]

Anyone run these in both front and rear diffs? I know the most common combo is the OD gear set up front and lower ratio in the rear, just wondering what real world effects if I ran these in both axles,
if they don't work I'll order up the OD set and put these in the Rears of my Rigs
thanks Guys

[Soldat Vaillant]

Running the under drive gears in both axles with simply lower your gear ratio. You'll lose a little wheel speed but get a little more pulling power.

[mk3jetta]

I run underdrives front and rear, you can still change the pinion gearing around to make adjustments and you get a bit less torque twist from the driveline. I'm currently running a 30t with 17/87 and the 43/13s

[Honcho907]

Originally Posted by mk3jetta

I run underdrives front and rear, you can still change the pinion gearing around to make adjustments and you get a bit less torque twist from the driveline. I'm currently running a 30t with 17/87 and the 43/13s

Thanks that's what I was looking for the different variations of spurs and gears what works and what doesn't.... before I start tearing down i wanted to see if there was somone with a " HELL NO THAT WON'T WWORK" advice.