Xtra Speed axle Finally received my axle for the front of my rig. Everything mounted to it perfectly. Added 100 grams and ran me $25 shipped. http://i1243.photobucket.com/albums/...pswl4pozoy.jpg http://i1243.photobucket.com/albums/...ps64wfjj2b.jpg Sent from my SM-N910P using Tapatalk |
Re: Xtra Speed axle Nice where did you get it from? How long did it take to get your order? |
Re: Xtra Speed axle Xtra Speed Alloy Front Rear Axle Housing Axial SCX10 II RC Cars #XS-SCX230056BK | eBay they look pretty good...hows the fit and finish of them? |
Re: Xtra Speed axle The fit and finish is excellent. I have the counterpart for my Bomber and those are about 4mm narrower so I had to modify the lockouts and the c hubs to fit. Not on these, everything bolted on perfectly. http://i1243.photobucket.com/albums/...psex9rcwjt.jpg http://i1243.photobucket.com/albums/...pspho1djrf.jpg Sent from my SM-N910P using Tapatalk |
Re: Xtra Speed axle I appreciate the fact that it's literally the stock axle - down to just about every little aesthetic detail - except made from aluminum. (Unlike a lot of other ones where they're completely redesigned. If it's as decent as it looks, then getting that for $25 is a pretty boss deal. (especially compared to the Currie axles) |
Re: Xtra Speed axle If you didn't know it was aftermarket.... http://i1243.photobucket.com/albums/...psltydafxq.jpg http://i1243.photobucket.com/albums/...psywq1peqf.jpg Sent from my SM-N910P using Tapatalk |
Re: Xtra Speed axle It took about 2 weeks to show up, but I chose the cheapest shipping option. Sent from my SM-N910P using Tapatalk |
Re: Xtra Speed axle http://i1243.photobucket.com/albums/...psrr5elopv.jpg http://i1243.photobucket.com/albums/...psq3g5cukk.jpg Sent from my SM-N910P using Tapatalk |
Re: Xtra Speed axle oh wow...what drive shafts are u using? im dying to get rid of the plastic set |
Re: Xtra Speed axle Mip. Part #s 08139, 10135, 11118 and 1147. Sent from my SM-N910P using Tapatalk |
Re: Xtra Speed axle These are aluminum not pot metal like the phat axles? Sent from my Nexus 6P using Tapatalk |
Re: Xtra Speed axle Definitely not ferrous. Won't know until I break it I guess, it is a cast piece from the looks of it though. |
Re: Xtra Speed axle I'm mostly curious how easily they get scratched and how they slide on the rocks Sent from my Nexus 6P using Tapatalk |
Re: Xtra Speed axle It just came in and was installed yesterday. There is snow on the ground right now but should melt by the weekend. I will update as soon as I have some time on it. |
Re: Xtra Speed axle I agree.. |
Re: Xtra Speed axle Pot metal is generally referred to as low quality metal, not a specific type of aluminum or steel. |
Re: Xtra Speed axle I like the looks and price but skeptical about strength if indeed being casted. Let us know how durable they are. |
Re: Xtra Speed axle More and more options...... Are you NOT entertained? |
Re: Xtra Speed axle I took a gamble and ordered a pair. Price is too good to pass up. |
Re: Xtra Speed axle Got my axles today and i must say for 25 bucks a piece, they are nice. Virtually identical in dimensions to the plastic ar44 axle housings. Ordered them from eBay which was done through RCmart in Asia. Took about two weeks to arrive. Everything was threaded and utilized the OE hardware. I'm very happy with the fit. Mated to all my strc aluminum bit fine too. |
Re: Xtra Speed axle That looks sweet.For that value,its a bomber,especialy if it fits nice |
Re: Xtra Speed axle Glad to hear some feedback on these, I've got some on order but I wasn't sure what to expect.. |
Re: Xtra Speed axle I originally only ordered one for the front to check it out. I was so impressed, the rear shows up tomorrow! Sent from my SM-N910P using Tapatalk |
Re: Xtra Speed axle I have also ordered a pair after rounding off the splines on one side of my stock front plastic axle. I'll be using them with SSD c-hubs up front and will update when I get them installed and tested. --Hector |
Re: Xtra Speed axle Quote:
|
Re: Xtra Speed axle Quote:
|
Re: Xtra Speed axle Got my xtra speed axle housings today! I am so impressed for less than $50 shipped for both! They are beautiful and was a breeze to install. Only problem I had was getting the internal (larger) drive shaft bearing in. Seemed that the paint made it just too tight of a squeeze. After some careful dremeling they were perfect. Just the housing itself weighed more than the entire stock front axle with the Ssd chubs, knucks, and axial axle shafts. More than 100grams more than stock. Gonna take a wire wheel to the diff covers as soon as I can and get that red off of there! Anyone looking for new housings, I suggest these! https://scontent.fsnc1-1.fna.fbcdn.n...e7&oe=58D693CA https://scontent.fsnc1-1.fna.fbcdn.n...1e&oe=58771F68 https://scontent.fsnc1-1.fna.fbcdn.n...6b&oe=58764ABF |
Re: Xtra Speed axle will be interesting to see how these hold up after some time goes being run on the rocks and taking tumbles as well... |
Re: Xtra Speed axle I think I like the diff covers silver. A wire wheel made short work of the red. http://i1243.photobucket.com/albums/...psvugi32wy.jpg Sent from my SM-N910P using Tapatalk |
Re: Xtra Speed axle For sure. The red would have gotten all scuffed up any way. |
Re: Xtra Speed axle Nice work Shawn, that looks GREAT. So much better then the red FTW, "thumbsup" ~D |
Re: Xtra Speed axle http://i1243.photobucket.com/albums/...pskuykepqv.jpg Was thinking about trying to polish, naaaah! Sent from my SM-N910P using Tapatalk |
Re: Xtra Speed axle Based off of the reviews here, I went and ordered a set of the axle housings. My buddy also got some for his V1 SCX10, which add double the weight these do apparently. Has anyone found these incompatible with certain other parts? |
Re: Xtra Speed axle Imagine these axles mated with those new brass knuckles from Hot Race. So much weight down low. |
Re: Xtra Speed axle diff cover looks great silver how are the holding up around the pinion bearing any play? and wear on the rocks. does the stock diff cover fit the xtra speed axle case bye any chance |
Re: Xtra Speed axle Quote:
|
Re: Xtra Speed axle It is aluminum, no rust. The bearings all around are a great fit. I am using steel pivot balls in the links, needed to sand the paint down to fit in the link mounts. Don't have a ton of time on them but so far so good. Sent from my SM-N910P using Tapatalk |
Re: Xtra Speed axle Quote:
Sent from my SM-N910P using Tapatalk |
Re: Xtra Speed axle Quote:
|
Re: Xtra Speed axle thats good to hear thanks guys for the info |
All times are GMT -6. The time now is 03:29 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com