Dlux Hamberger I just recently picked up a used Hamberger trans with MT metal gears for my 10.2 and wanted to know is anyone running one and how do they like it. On paper I like everything about it, have no real world experience with it. Also what pinion sizes are you running with it in your setup? Im used to the basic 3 gear style Axial trans, so the Hamberger is a little out of my realm. |
Re: Dlux Hamberger Quote:
It’s not a complete bolt on part you have to do a little finessing to make it fit and run smooth. Also my WB is 11.4 so I had to cut down my drive line. For gearing the MT metal gears you must use .6 mod pinion. The smallest gear you can run without modification is a 16 tooth pinion. I use a 14 tooth for a 13T HH crawlmaster. But I had to grind the center shaft a little. |
Re: Dlux Hamberger Awesome info thank you! I’m a 12” wb so I’m thinking it should fit well. I’ll be running either a 27 or 35 turn HH Trailmaster Sport on 3s. I’m excited to see all the hype about these. I’ve Hearn nothing but good things about them. Sent from my iPhone using Tapatalk |
Re: Dlux Hamberger https://uploads.tapatalk-cdn.com/201...e7f6afa5e4.jpghttps://uploads.tapatalk-cdn.com/201...e7775be8ba.jpg Sent from my iPhone using Tapatalk |
Re: Dlux Hamberger I see you didn’t use the spacer between the motor and motor plate. How where you able to clear the center top shaft. Here’s a picture of mine with the spacer. https://uploads.tapatalk-cdn.com/201...7ddf7a1255.jpg Sent from my iPhone using Tapatalk |
Re: Dlux Hamberger I picked up the trans used, so the previous owner cut the shaft flush with the plate and bearing. https://uploads.tapatalk-cdn.com/201...39e6d8b872.jpg Sent from my iPhone using Tapatalk |
Re: Dlux Hamberger Nice, I’m going to have to do that myself. |
Re: Dlux Hamberger I keep going back and forth on grabbing one of these. The open gears just make me nervous. Sent from my iPad using Tapatalk |
Re: Dlux Hamberger Someone makes a 3D printed cover for that trans. I’m sure someone here will chime in on the name. You can’t go wrong with Dlux! Later, Farmer |
Re: Dlux Hamberger Quote:
|
Re: Dlux Hamberger Quote:
Fishs crawler parts. https://www.fishscrawlerparts.com/st...Wrapper.html#/ Sent from my iPhone using Tapatalk |
Re: Dlux Hamberger Quote:
Thanks good sir!! Sent from my iPhone using Tapatalk |
All times are GMT -6. The time now is 05:18 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com