New SSD Trail King Scale Transmission Set |
Re: New SSD Trail King Scale Transmission Set Nice, you guys are killing it. This is the cheapest option for this type of tranny that fits the point system of our local scale series. |
Re: New SSD Trail King Scale Transmission Set When are the Servo mounts & battery plates going to be available? |
Re: New SSD Trail King Scale Transmission Set Quote:
Soon. I'm having a week off and will get on with releasing them after a week or two... |
Re: New SSD Trail King Scale Transmission Set This is probably going to sound like a 'dumb' quotation, but, so be it. Is this the same transmission that comes in the TK kit, or is it different in any way(s)? If it is different, what are the differences/changes? ~ More peace, love, laughter & kindness would make the world a MUCH better place [emoji1690] |
Re: New SSD Trail King Scale Transmission Set How much reduction is possible with the Spur pinion? How much overall reduction in the transmission itself? I am running 14/87 and a Axial 3 gear with 10 II axles in my big Bronco and would love to drop a scale transmission in, but the brushed motors don't like much taller gearing than I have currently due to 5.4" Tsl Boggers. My current transmission ratio is 16:1 or so. |
Re: New SSD Trail King Scale Transmission Set Quote:
The aluminum transmission is lower with a stock ratio of 14.33:1 using the stock 14T pinion. There is room for going down a few teeth on this one as well. |
Re: New SSD Trail King Scale Transmission Set Quote:
|
Re: New SSD Trail King Scale Transmission Set Quote:
Putting in an Axe 550 3300kv system, and it has a 5mm shaft and the pinion that comes with the Axe system is a 12t but the wrong pitch. I got no mesh love between them, so need to source a pinion that will fit on the 5mm shaft from the motor, and mesh with the stock gear in the tranny. |
Re: New SSD Trail King Scale Transmission Set Quote:
https://www.amainhobbies.com/robinso...54470?v=218930 Hot Racing makes smaller 48P pinions for a 5mm shaft but I'm not sure if that thick collar at the base of the gear will interfere with the mesh on the SSD trans. https://www.asaphobbies.com/hot-raci...0aAsAuEALw_wcB |
Re: New SSD Trail King Scale Transmission Set Quote:
that's what I discovered. Ordered a 17,18,19t RR pinion and a 14 and 16t from Hot Racing. Nice to have some options. |
Re: New SSD Trail King Scale Transmission Set Just to confirm, this will not work with a centered front SSD Diamond housing? I just put them in my SCX :roll: |
Re: New SSD Trail King Scale Transmission Set Shot of the front end on my SSD. https://i.ibb.co/VCzdY9M/IMG-20200613-212737801.jpg I'll get a pic of the underside so you can see the layout with the SSD Tranny. I think it would work as the pumpkin is only shifted about 2/3rds of an inch to the Left side (drivers side) of the axle. https://i.ibb.co/HdMjxsD/IMG-20200613-212729046.jpg Here are a few close-ups https://i.ibb.co/sv0M3PY/IMG-20200621-110924840.jpg https://i.ibb.co/nfZWw2v/IMG-20200621-110933286.jpg https://i.ibb.co/Rh8P1CN/IMG-20200621-111003644.jpg https://i.ibb.co/rHFKPN9/IMG-20200621-111012393.jpg https://i.ibb.co/wNB7JtK/IMG-20200621-111036464.jpg https://i.ibb.co/Tc7WHL7/IMG-20200621-111045972.jpg https://i.ibb.co/fvY1fWj/IMG-20200621-111053554.jpg |
Re: New SSD Trail King Scale Transmission Set How is the slop on this tranny at the outputs? Lou |
Re: New SSD Trail King Scale Transmission Set Quote:
It's a rather tight driveline, from tranny gear all the way through to wheels. |
All times are GMT -6. The time now is 01:28 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com