cage mod 5 Attachment(s) well i wasnt sure if i wanted to cut it or not but im happy with it its going to show all those cool scale items prolines coming out with in dinky's cargo box going to have to get a new box tho this ones got alot of gaps now still have to get some heat shrink to cover the bars with and smooth out the sanding a little more but it did what i wanted it to . let me know what you think |
Re: cage mod that looks very clean! i like"thumbsup" |
Re: cage mod 1 Attachment(s) oops forgot the pics with roof on lol |
Re: cage mod Looks great especially with the roof mod. Nice work! |
Re: cage mod thanks guys it will look better tomorrow finish cleaning the bars and try to blend it in . ive got an idea for a cloth top just trying to find right parts for it |
Re: cage mod looks good. where did you get that bed for it? |
Re: cage mod Do you heat the plastic to get it to bend? |
Re: cage mod the drop bed is from dinky's and yes a little heat were i wanted it to bend ans the extra length is from the two x bars i cut out drilled and taped dead center with a jig i made |
Re: cage mod that does look really well done...been back and forth on doing this to mine.... |
Re: cage mod Nice mods to the cage! Looks great with the panels. |
Re: cage mod Very good change, this rear change must be the best style I've sean... very good. These two ends of the tube were bent with heat until they are aligned and then opened the thread to finish with a threaded rod, right? how the low end of the tip was screwed to the top end? |
Re: cage mod i made a jig to drill both ends dead enter then too a 1.5 long 6/32 screw ground the end off to make a rod sort of just like putting links together heated it were i wanted the bend brought it down to were i wanted it to meet the back marked and cut the bevel then drilled again dead center for a self tapping screw like the ones holding the cage together drilled a clearance hole in the rear were the screw for the back support is in the same indent and screwed it thru the the back panels cover the screws. the only thing is watch the heat it doesnt take much and im going to put a pc of heat shrink the hole way up to cover the seam its right on but i think it will look better if you want pics of the jig just yell its really easy to make |
Re: cage mod Quote:
the rear risers are gone i used the two bars in the roof you cut out to make the the support bars longer |
Re: cage mod Ok I understand, can You show us some pics of the jig you made... |
Re: cage mod 4 Attachment(s) here it is you need it to be around 2" long clamp it in the drill press drill a hole the drill size for the tap your using right thru it then with out moving it drill it again half way thru with the tube size i used 17/64 it was very tight . the idea is not to let the tube move when drilling it and letting the guide guide the tap size drill bit . the 1" of stock in the guide should hold the bit streight . slide the guide over the tube and drill it. i hope i didnt confuse anyone if i did just yell |
Re: cage mod Thanks snohiker...."thumbsup" I will try to do that. |
Re: cage mod 2 Attachment(s) a couple with new roof |
Re: cage mod well i put 1/4 inch heat shrink over the tubes and you cant even tell i spliced it will get some pics tonite to show it off . im very happy with the results |
Re: cage mod Looks great. On a side note, where did you get that whip antenna? |
Re: cage mod i got it at rpp hobby got one for the honcho to Reign RC scale CB Antenna! |
Re: cage mod i like the way the roof panel came out |
Re: cage mod I've made this change on my Wraith and I must say it was a wonder.... I'll take some pictures tomorrow and then I put here. I guess we could call "snohiker wraith cage mod"..... |
Re: cage mod lol im glad it worked for ya the drilling can go so wrong if your not carefull |
Re: cage mod ok, I did not use a jig :roll:, but I'm used to taking aim at the center :twisted:... it was cool."thumbsup" |
Re: cage mod Quote:
I did this mod and took it a step further. Once I cut the extra bars off the roofs center section I bolted it back in only reversed. Now the front points to the back and normally where the front curves down and comes to a point, I just bent the stock roof panel down and cut it to a point like stock in the front. I'll try to get a pic up showing what I mean. Came out great, I just now need to decide weather to strap in a spare tire or not.:mrgreen: |
Re: cage mod Quote:
|
Re: cage mod 4 Attachment(s) Here's an attempt at some pics.Kinda surprised how well they turned out considering there from a cell phone. Where the down bars in the back reattach to the lower cage at the bottom I filled in the seems with a plastic epoxy. Once I hit it with some flat black touch up paint over the epoxy it should look like the cage and down bars are molded together.;-) I've still got to make another rear hatch/cargo cover. The one currently on it doesnt fit as well now and has cut outs in it for the small bars that were removed. Steve is getting lazy, he thanks all he has to do is drive but he needs to learn how to clean windows. That windshield is filthy.:mrgreen: |
Re: cage mod man that looks good, i chopped mine up the same but the bars on mine are closer the the doors |
Re: cage mod 1 Attachment(s) Thanks, I think it looks more like a 2 seater buggy now,that long stock roof makes them look like a station wagon.:mrgreen: |
Re: cage mod nice job i like the roof point in the front kinda looks like a visor . i need to get a windsheild next . are those xr10 wheels kinda like the look |
Re: cage mod the mod turned out real slick... thinkin on tryin it my self |
Re: cage mod post some pics if you did it id like to see how it worked for others . if you use the jig idea and take your time its almost seamless Quote:
|
Re: cage mod Ok.... as promised, though late, here are photos of my cage mod, it is for me the best cage mod for the Wraith, very well thought snohiker..."thumbsup" http://img855.imageshack.us/img855/7936/dsc07892s.jpg http://img710.imageshack.us/img710/2781/dsc07893f.jpg http://img813.imageshack.us/img813/4520/dsc07895q.jpg http://img856.imageshack.us/img856/1350/dsc07894x.jpg Enjoy..."thumbsup" |
Re: cage mod DiabloCrawler I really like that mod!! I have to do that to my Wraith too. How long did it take you? Is it easy enough for a rookie to try? That looks so much better than the stock Wraith look. |
Re: cage mod very cool thread, looking forward to doing this |
Re: cage mod Quote:
OP, nice job on the cage mods. 8) |
Re: cage mod Looks good guys. I can't wait to pick mine up. That looks like something interesting to try out. |
Re: cage mod Quote:
|
Re: cage mod Quote:
Where do you buy that aluminum stock at? That is an awesome jig!! I wish I had that setup when I did my cage! "thumbsup" |
Re: cage mod Looks good. I wished my stock wheels were black. Much cooler looking... |
All times are GMT -6. The time now is 05:50 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com