RCCrawler Forums - Brandon's 1.9 Wraith Build

Page 5 of 6

Show 40 post(s) from this thread on one page

RCCrawler Forums (http://www.rccrawler.com/forum/)

- Axial Wraith (http://www.rccrawler.com/forum/axial-wraith/)

- - Brandon's 1.9 Wraith Build (http://www.rccrawler.com/forum/axial-wraith/386935-brandons-1-9-wraith-build.html)

jeeper_05

01-24-2013 03:13 PM

Re: Brandon's 1.9 Wraith Build

Quote:

Originally Posted by Brandon (Post 4142228)

Its a traxxas part, I cant seem to find the part number anywhere right now to help you out. I'm sure somebody can chime in with the correct info on them "thumbsup"

https://www.rpphobby.com/ProductDeta...tCode=TRA3727A

Brandon

01-24-2013 04:02 PM

Re: Brandon's 1.9 Wraith Build

Quote:

Originally Posted by jeeper_05 (Post 4142345)

https://www.rpphobby.com/ProductDeta...tCode=TRA3727A

Thank you!

kmoore

02-01-2013 06:01 PM

Looks great Brandon! All the info I was looking for in one thread. Any thoughts on mirroring an scx10 trans under the interior? Just wondering if it'll still clear. If you had tried it. Thanks again!

jpomenich

02-01-2013 09:28 PM

Re: Brandon's 1.9 Wraith Build

man you build some nice rigs

Brandon

02-04-2013 12:09 PM

Re: Brandon's 1.9 Wraith Build

Quote:

Originally Posted by kmoore (Post 4157492)

Looks great Brandon! All the info I was looking for in one thread. Any thoughts on mirroring an scx10 trans under the interior? Just wondering if it'll still clear. If you had tried it. Thanks again!

Thank you! I have not tried running the trans flipped. There might be some interference with the interior tray.

Quote:

Originally Posted by jpomenich (Post 4157803)

man you build some nice rigs

Thanks!

jeepscx10

02-06-2013 09:27 AM

Re: Brandon's 1.9 Wraith Build

Quote:

Originally Posted by Brandon (Post 4161954)

I have not tried running the trans flipped. There might be some interference with the interior tray.

Mirroring the SCX10 tranny does interfere a little with the interior, the motor causes the driver side of the interior to bow upward a little, which i didn't like but fixed it with a little heat to mold it to the curve of the motor and problem solved no more bowed interior.

Meatwad

02-06-2013 09:59 AM

Hey now, that's a lot more elegant than chopping a hole in it like I did :mrgreen: But it's for cooling purposes, yeah that's why I did it too!

DeweyCJ5

04-12-2013 05:50 AM

Re: Brandon's 1.9 Wraith Build

any video or news on this rig ?

Fowlboy

04-13-2013 09:27 AM

This has inspired me to build another EB!.... Great build!

DrDiff952

07-25-2013 12:11 PM

Re: Brandon's 1.9 Wraith Build

I am wondering about the Radio Shack Project box. Did you mount it opening up or down? How water tight is it? Can you get a better picture of it?

Arctic Fire

08-24-2014 06:32 AM

Re: Brandon's 1.9 Wraith Build

I'd really love to see it with the doors on, any chance for some pics?

Richterat83

09-11-2014 07:45 PM

Re: Brandon's 1.9 Wraith Build

Quote:

Originally Posted by Brandon (Post 3768018)

Neither. I went through some trial and error to get the wheelbase to match the openings on the body.

Keep in mind the SCX10/AX10 axles have the AX80043 4-Link Axle truss installed.

Front Lower links: AXA1427 50mm posts with AX80005 bent ends on one side, and the short bent AX80057 ends on the other.

Front Upper Links: AXA1427 50mm posts with AX80057 short bent ends on both ends.

Rear upper and lower links: AX30714 7x73 Links with the long bent rod ends from AX80057 on each end.

2X TowerHobbies.com | AXIAXA1427 AXA1427 Axial Post 7x50mm Grey (2)
2X TowerHobbies.com | AXIAX80057 AX80057 Axial Linkage Set XR10
1X TowerHobbies.com | AXIAX80005 AX80005 Axial Linkage Set
2X TowerHobbies.com | AXIAX80043 AX80043 Axial Links Parts Tree RTR SCX10
2X TowerHobbies.com | AXIAX30714 AX30714 Axial Threaded Aluminum Pipe 7x73mm Grey (2)

Ill add some pics in a minute.

Thanks for this, just ordered the links and parts trees along with a stainless hardware kit to start my 1.9 wraith

Love this build!

gsrcivic

09-11-2014 07:55 PM

Re: Brandon's 1.9 Wraith Build

Man never really caught on to the 1.9 wraith look but u axial guys sure do know how to use all axial parts for a axial rig lol....looks awesome brandon keep it up

Richterat83

09-19-2014 08:08 AM

Re: Brandon's 1.9 Wraith Build

Curious if you've got a pic of how much you trimmed where the tires were rubbing. I've got zero flex when the wheels turned (tires hit the chassis)

jerrodww1974

09-19-2014 08:13 AM

Re: Brandon's 1.9 Wraith Build

I like this build so much when I was shown Brandon's build I was inspired to build one like it.

http://i1246.photobucket.com/albums/...ps60da28ac.jpg

http://i1246.photobucket.com/albums/...ps1648ebc3.jpg

Brandon

09-19-2014 08:59 AM

Re: Brandon's 1.9 Wraith Build

Quote:

Originally Posted by Richterat83 (Post 4898067)

Curious if you've got a pic of how much you trimmed where the tires were rubbing. I've got zero flex when the wheels turned (tires hit the chassis)

What tires are you running? I have 1.9 ripsaws on this build, they are fairly short compared to a lot of the newer scale 1.9's on the market now.

Quote:

Originally Posted by jerrodww1974 (Post 4898071)

I like this build so much when I was shown Brandon's build I was inspired to build one like it.

That looks great!! Good job "thumbsup"

Richterat83

09-19-2014 09:07 AM

Re: Brandon's 1.9 Wraith Build

R35 1.9 Treps

Brandon

09-19-2014 09:27 AM

Re: Brandon's 1.9 Wraith Build

Quote:

Originally Posted by Richterat83 (Post 4898107)

R35 1.9 Treps

You might have to stretch the front wheelbase a bit to help with clearance then.

Richterat83

09-19-2014 09:32 AM

Re: Brandon's 1.9 Wraith Build

I'll swap the 1.9 ripsaws over off the XJ first and check it again. Worst case, i stretch the wheelbase. Just hoping to still have it fit a Dingo body

difflock120

09-20-2014 10:30 PM

Re: Brandon's 1.9 Wraith Build

What a nice build thead. Thanks for sharing.

All times are GMT -6. The time now is 11:03 PM.

Page 5 of 6

Show 40 post(s) from this thread on one page