Letsgojeep's Full steel wraith, by ScaleReady
 

Numero 3! Only two more left on the list....till I open the flood gates again:ror:

Mark is a good friend of mine, and after attempting to steal that last two I built, he is finally getting his way. Time for his rendition of my chassis"thumbsup"

My favorite part about building this chassis, is that everybody has their own little twist that they do to em. I love that!


Pictures to come in a minute....

Re: Letsgojeep's Full steel wraith, by ScaleReady
 

OH BOY I get to steal this one haha:mrgreen:

Re: Letsgojeep's Full steel wraith, by ScaleReady
 

Here you go! So far...

Re: Letsgojeep's Full steel wraith, by ScaleReady
 

Looks good so far"thumbsup"

Is this one gonna be "scrambler style"?

Re: Letsgojeep's Full steel wraith, by ScaleReady
 

any updates ?:mrgreen:

Re: Letsgojeep's Full steel wraith, by ScaleReady
 

Chassis looks good. Nice and simple, not too many bars going every whicha way

Are you using solid rod or actual tube? And what are you using to bend it?

Re: Letsgojeep's Full steel wraith, by ScaleReady
 

Man, I have not had much time for anything after work lately, but I got a little more accomplished"thumbsup" It's a small update, but it is an update! I got the rear cage finished with the spreaders in"thumbsup"

Re: Letsgojeep's Full steel wraith, by ScaleReady
 

Fastback style"thumbsup" This is really a better look to the chassis than the stock styling, in my opinion:mrgreen:

Thanks! That is the beauty of the wraith chassis. Simple, yet solid"thumbsup"

I use 3/16" cold rolled solid stock"thumbsup" I use a variety of different diameter home-made dies to get the desired bends. Nothing fancy over here:mrgreen:

Re: Letsgojeep's Full steel wraith, by ScaleReady
 

looks great Phil

Re: Letsgojeep's Full steel wraith, by ScaleReady
 

Nice chasis you make. Are you taking orders or any idea when a new list is going to start ?

Re: Letsgojeep's Full steel wraith, by ScaleReady
 

Chassis is looking good. Mine took a beating this last weekend. I rolled it one time about 30-40 ft down a 1:1 trail and the only damage was one of the bumper supports bent and of course chipped paint. The added weight of the steel chassis wasn't even really noticeable.

I am interested to see how others build their chassis's.

Re: Letsgojeep's Full steel wraith, by ScaleReady
 

Nice!! Not too bad for damage. Yeah, that 1/8" rod is not the strongest. I may try to use 1/8" music wire, it is much stronger. Although, once welded, it becomes a little more brittle. At least the 1/8" rod is easy to put back into shape.:mrgreen:

Re: Letsgojeep's Full steel wraith, by ScaleReady
 

What's really cool is I have a strong feeling not one of these will look the same....all badass in their own way :)

Re: Letsgojeep's Full steel wraith, by ScaleReady
 

This one has boatsides now! :twisted: Shock mounts on. We will be putting another set of shock mounts up higher also. These boatsides were tricky, but I think they came out good. I need to open up the access holes a bit more to get a button head screw in there, but over-all, they're done."thumbsup"

Re: Letsgojeep's Full steel wraith, by ScaleReady
 

Purdy and smooth! Looks like another sick ScaleReady Wraith on her way! "thumbsup"

Re: Letsgojeep's Full steel wraith, by ScaleReady
 

Love the boatsides! It is looking good.

Re: Letsgojeep's Full steel wraith, by ScaleReady
 

Very nice work.

Re: Letsgojeep's Full steel wraith, by ScaleReady
 

Man that looks slick :) Did you weld it and grind it smooth or braze it or what?