Switching to 32 pitch spur
 

Hey guys ordered a 32pitch spur gear for my wraith.. After trying to install i realized it will not work with the stock slipper clutch.. Is there anyway i could use a different slipper clutch? if so where can i purchase one?Thanks "thumbsup"

Re: Switching to 32 pitch spur
 

What brand of gear did you buy? I use traxxas e-maxx gears and they fit perfectly.

I used my duratrax 60t spur 32p just fine!

Re: Switching to 32 pitch spur
 

i bought a Robertson Racing 32 pitch spur

Re: Switching to 32 pitch spur
 

also was looking to upgrade to a aluminum or metal spur if possiable. Thanks

Re: Switching to 32 pitch spur
 

the Traxxas Slash 4x4 bolted right up to the stock slipper, so i cant see why it wouldnt work for a steelie?

Re: Switching to 32 pitch spur
 

Why would you want an alloy spur? You need to have a weak link in the drivetrain somewhere and the spur is the best place.

Re: Switching to 32 pitch spur
 

I don't think that Robinson spur is a bolt on. Is it meant for a revo?

Re: Switching to 32 pitch spur
 

I have used both the 56 and 60 tooth duratrax spurs on the stock slipper without issue. RPP has them.

Re: Switching to 32 pitch spur
 

what teeth size spur are you all using? I been looking for a 32p spur in a 84tooth but can't seem to find one for some reason or I'm just missing them

Re: Switching to 32 pitch spur
 

That spur would be huge. 60t is as big as you can go AFAIK.

Re: Switching to 32 pitch spur
 

Hmm.. A 56T 32 pitch spur is the same size as a 83T 48pitch spur...
A 84T 32 pitch spur would be gigantic...

Re: Switching to 32 pitch spur
 

ok so what earing are you all using for a slow cralwer using the 32p gears?
sorry guys pretty new and trying to learn and set my wraith up for strictly crawling

That depends on the motor and batteries you are running!

Re: Switching to 32 pitch spur
 

Low-tooth pinion. I'm running a 54T 32 pitch spur and an 11T pinion with an Integy 35T V11 motor. it's pretty damn slow.

Re: Switching to 32 pitch spur
 

The Traxxas Revo spur gears are just a wee bit off. You also need a washer between the gear and the mounting plate if you use the stock screws.

Re: Switching to 32 pitch spur
 

I have the biggest spur I can (60t) and the smallest pinion I can (11t 5mm bore). If you have a normal size motor shaft you can go even smaller on the pinion.

Re: Switching to 32 pitch spur
 

motor i have is a Holmes Hobbies 55t Torquemaster handwound. battries i have...well i have a few. got some 3s 1300 MAH 30c and also some 2s 5000 MAH 40c

Re: Switching to 32 pitch spur
 

I'm running a 56 duratrax 32p spur and 14 pinion and a 2100kv motor. Its plently slow.

56 is actually the biggest spur I can fit with the tmaxc driveshaft stock I could just barely fit a 66 with the cover removed

60T spur and 11-14 pinion is a good start