Szczerba's IFS Wraith Build #2 3 Attachment(s) This is a semi-built, rebuild thread. Built this up about a year ago. http://www.rccrawler.com/forum/axial...ild-sorts.html Should have never sold it but money talks. Anyways. I had some parts of an Exo left over so I figured I would build another one with my current 2.2 wraith. Main chassis lines were laid down by mojave450rider VP Wraith Axle out back with VP locker and HD gears. Dinky RC rear 4 link mount Wraith Skid Exo front end Supershafty one piece motor mount Robinson Trans gears Crawler Innovations 5mm transmission outputs Mamba Max Pro Tekin Pro4 4000kv MIP Drivelines VP LED bars. 2" and 4" 2.2 Pitbulls VP KMC Wheels Crawler Innovations 6.0" Double Deuce foams. Firm outers. Here is the solid axle setup from a few months ago. And one from the STL G6. Rig broke pretty quick that day. |
Re: Szczerba's IFS Wraith Build #2 10 Attachment(s) Cut, chop, rebuild. Got most of the front reworked for the Exo IFS. Rear upperlink suspension will get attended to soon. The wraith suspension link geometry just doesn't do it for me anymore. The rear will have more up travel in the near future. I'll be swapping out the rear shocks for some longer ones. |
Vanquish clamping locker to hold the output drives in the locker up front. I used different set screws. Axial HD 38/13 gears. http://img.tapatalk.com/d/13/07/30/ga8esu2e.jpg Added some adjustability to the rear upper links. http://img.tapatalk.com/d/13/07/30/8y4y7eha.jpg Chassis Mostly complete http://img.tapatalk.com/d/13/07/30/neheqedy.jpg Sent from my iPhone using Tapatalk 2 |
Re: Szczerba's IFS Wraith Build #2 Did you use knurled point set screws? Those are the ones I've had any luck with locking up the Exo' ed front end. Rig looks good. |
Quote:
Playing with full bump rear shock mounting. May have to rework the rear part of the chassis. The front wont compress as much as pictured. http://img.tapatalk.com/d/13/07/31/apudyny6.jpg http://img.tapatalk.com/d/13/07/31/emu3umer.jpg Rear upper link geometry is better after upper link mounts were moved. Still can go up a hole too. http://img.tapatalk.com/d/13/07/31/radyna5a.jpg |
Re: Szczerba's IFS Wraith Build #2 Bitchin"thumbsup" Later, Farmer |
Quote:
The real full bump setup. A little bit of bracing and Ill be done welding. http://img.tapatalk.com/d/13/07/31/y3y5ybup.jpg Drooped out http://img.tapatalk.com/d/13/07/31/ry2ezyru.jpg |
Wasnt impressed with the down travel with 4" shocks so I mounted some TLT mounts on some steel revo push rods and used some 5" shocks. Presto bango perfecto bump and droop. Smooth as cream corn on a slippy slide cycling too. http://img.tapatalk.com/d/13/08/01/u5y4abyr.jpg http://img.tapatalk.com/d/13/08/01/3upage4a.jpg http://img.tapatalk.com/d/13/08/01/y7ety6ys.jpg http://img.tapatalk.com/d/13/08/01/denume5e.jpg http://img.tapatalk.com/d/13/08/01/uby5agu7.jpg |
Re: Szczerba's IFS Wraith Build #2 now we're talking... suspension looks good 8) |
Quote:
Made some inner fenders and reinstalled interior and whatnots. http://img.tapatalk.com/d/13/08/02/anyzu9uv.jpg http://img.tapatalk.com/d/13/08/02/6ajezegy.jpg http://img.tapatalk.com/d/13/08/02/7yhury5a.jpg http://img.tapatalk.com/d/13/08/02/ygejyha8.jpg http://img.tapatalk.com/d/13/08/02/eqytu9yt.jpg http://img.tapatalk.com/d/13/08/02/a8y9esu3.jpg |
|
4 Attachment(s) Attachment 249056 Attachment 249057 Attachment 249058 Attachment 249059 Sent from the Lab @ the CI Compound |
3 Attachment(s) More pics from the ETXRCC G6: Attachment 249060 Attachment 249061 Attachment 249062 Sent from the Lab @ the CI Compound |
Re: Szczerba's IFS Wraith Build #2 video... another one of szczerba in the TTC course coming.. <iframe width="853" height="480" src="//www.youtube.com/embed/oBT9pgoklNk" frameborder="0" allowfullscreen></iframe> Watch in HD.. |
Re: Szczerba's IFS Wraith Build #2 Stay tuned! Szczerba's singing savox servo is up next! :lmao: |
Re: Szczerba's IFS Wraith Build #2 <iframe width="640" height="360" src="//www.youtube.com/embed/ZvDGW_uqUcA" frameborder="0" allowfullscreen></iframe> |
Re: Szczerba's IFS Wraith Build #2 Thanks for the video's Josh. I finished up this rig about 24 hours before this event. I didn't know how it would handle. There is work to be done in the rear suspension to get the front end to stay down on steep verticals. It soaks up the bumps great through the fast sections. The Savox made it through the G6 course but was squeelling during the TCC event. And I forgot I didnt have all my Electronics fully water proofed. So the sippy hole did me in. |
Re: Szczerba's IFS Wraith Build #2 I have recently aquired this chasis man im so excited to ad my personel touch and them to this sick ifs chasis build im going with a zombie theme....ill post pics up as soon as my wheels come in from mayhem....thanks for a awsome build thread.... |
Re: Szczerba's IFS Wraith Build #2 Nice. Glad to see it's still wheelin' around! |
Re: Szczerba's IFS Wraith Build #2 Ill out it to good use up here I have a pro4 4600 kv motor when I ran my other wrexo wraith cage I burned up my Mmp probly my fault though how well did you 4000 kv work and did you have under over drives in it or stock hd axial gears? |
All times are GMT -6. The time now is 10:51 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com