RCCrawler Forums - Problems with Wraith Servo/BEC

RCCrawler Forums (http://www.rccrawler.com/forum/)

- Axial Wraith (http://www.rccrawler.com/forum/axial-wraith/)

- - Problems with Wraith Servo/BEC (http://www.rccrawler.com/forum/axial-wraith/484529-problems-wraith-servo-bec.html)

FilthyWraith

02-23-2014 12:45 PM

Problems with Wraith Servo/BEC

I got my Wraith wired in but when I plug in the battery I'm still able to use my steering no matter if the switch it off or not. BEC has red wire removed and all connections are soldered and seem good.

ESC is off with switch but still have steering.

When we remove the BEC it works as it should.

I'm using Savox 1270, MMP, and BEC.

TSK	02-23-2014 12:56 PM

Re: Problems with Wraith Servo/BEC

ESC should have the red wire removed and if BEC is plugged directly into the RX, then as long as the battery is plugged in, the rx will be getting power because the BEC itself does not have an on/off.

Basically, you need to unplug you battery when you are not running it, which you should be doing anyways. Best to just leave the esc turned on, and use the battery as your on/off.

BallnM3

02-23-2014 02:55 PM

Re: Problems with Wraith Servo/BEC

Totally normal to happen :)

FilthyWraith

02-23-2014 06:53 PM

Re: Problems with Wraith Servo/BEC

Thanks guys, wasn't sure if I was doing something wrong. "thumbsup"

All times are GMT -6. The time now is 03:16 AM.