So what did we decide was the best slipper for the AX2?
 

I don't want to search and mine slips worse than a penguins ass on a ski slope ins 2nd. I only running a roc412 on 2s. Thought about the slash 4wd slipper but if there is something better I'm all ears

Re: So what did we decide was the best slipper for the AX2?
 

So everyone is running the stock slipper?

Re: So what did we decide was the best slipper for the AX2?
 

I run the stock slipper in mine on 3s. When it starts slipping too much I clean the pads with rubbing alcohol to remove any oil, dirt and moisture. I'm geared pretty low (60:12) so that helps.

When I decide it's time to upgrade I'll probably go with a Robinson Racing slipper.

Re: So what did we decide was the best slipper for the AX2?
 

All 32p gearing
I run a 60t spur from duratrax. They have a 56t as well.
Or the Emaxx 58t will work as well.
A 60/12 ratio is what I use. Mostly on 3s

Re: So what did we decide was the best slipper for the AX2?
 

I'm on 32p with 56/11 and it slips like hell taking off in 2nd but hooks nice in1st. It does slip in 1st when the tires are in a real bind.

Re: So what did we decide was the best slipper for the AX2?
 

I've got a slash slipper on my from Robinson racing 32p 56t and a 13t spur on a tekin pro4 3300, I got the slipper nut tightened pretty good so it doesn't really slip at all

Re: So what did we decide was the best slipper for the AX2?
 

Stock slipper tightened till it stops. 3300kv trailmaster pro, 56/13, 3s and 6mm tranny/MIPs. Rides wheelies on pavement, only slips if it's really really bound.

Re: So what did we decide was the best slipper for the AX2?
 

I essentially have this same set up, just instead of the trailmaster I have the stubby puller pro. Awesome motor, however just glazed the slipper last night on the second test run right when my neighbor was asking me about my rig. So I'll be putting myself into the group with a Robinson Racing Slash 4x4 slipper system. I'll post up how it work out, I'm not too worried.

I thought I had the nut tightened down plenty, but clearly I was wrong.

Re: So what did we decide was the best slipper for the AX2?
 

Traxxas setup on mine. Aluminum friction pads.

Re: So what did we decide was the best slipper for the AX2?
 

I ended up just using a slipper from a slash 4x4 and it's working great.

Re: So what did we decide was the best slipper for the AX2?
 

I use the 48p steel slipper from RRP made for the wraith.