Rims I got my wraith kit all together. I now remember how much I hated to glue tires from when I drove rc 12 years ago. I also know that now I will have to rip it all apart again to get better foam and wheel weights. So I've bin looking on beedlock rims. It's a lot of info on some of the rims but everything is spread out. There is everything from cheap (eBay)to expensive rims but no info on the offset. I don't want my truck to get wider. I like the look of alu rims compared to the plastic axial beedlocks. So will I regret buying a set of https://www.ebay.com/itm/131414528438 Also when looking for rims I've seen some with air and not foam. Will air filled rims be a better choise? Cause new rims and foam even with the cheap rims will be just as much as a https://www.ebay.com/itm/301948340979 Skickat från min iPhone med Tapatalk |
Re: Rims Check out the Gearhead beadlocks. They can be flipped on the hub to be wide or narrow. I have 3 sets cause they're so nice. |
Re: Rims Quote:
But they are so expensive. 200 bucks to get just the rims is way to much for me. Skickat från min iPhone med Tapatalk |
Re: Rims Hi look at ssd wheels from rpp I had a set and going to buy a set again for my wraith.And vanquish hubs fit right on. |
Re: Rims Gear Head wheels start at $139 and include the hubs. That's for 4 Delrin beadlocks with rings hardware & hubs. All Aluminum beadlocks start at $149 with hubs. Not sure where you looked. Try RPP Hobby. |
Re: Rims Thing is, I don't want to land much more then maby 120$ with foams. That's why I'm asking about these cheap eBay/Ali express rims. Skickat från min iPhone med Tapatalk |
Re: Rims SSD wheels have a look on amain.they around 40 for a pair and you can choose different hubs from VP if you are not happy with the stock ones Sent from my SM-N910F using Tapatalk |
Re: Rims Air filled tires are a fad. Good foams from Crawler Innovations are inexpensive and worth their weight in gold. Motoworx makes a high quality aluminum wheel that is is middle of the price rage (not more than 140 in most cases). DCW is a vendor on here who makes delrin wheels...I'm sure a basic delrin wheel can be had for a little under 100 CI foams are $20 to $25 Sure you can buy those cheap VP knockoffs, but there are better quality options out there |
Re: Rims Quote:
It may be a little difficult to get tires, wheels and foams for $120, but Duratrax has new crawler tires for $20 a pair with decent foams in them and Hot Racing has stamped steel wheels for $45-55 for a full set of 4. I've been happy with the 2-stage foams from Pro-Line (#6172-00), fit real well in 5.5-6.0" OD tires. They cost about $15-20 a pair depending on where you buy them. http://www.rccrawler.com/forum/tires...ale-tires.html Hot Racing wheels, 12mm Hex white 4 BLW22H38 | eBay |
Re: Rims |
Re: Rims In this hobby you pretty much get what you pay for. I only like to spend my money once so do your research with that in mind. Basically bead locks are a worthwhile investment that you will enjoy long after you have forgotten what you paid for them. |
Re: Rims Quote:
|
Re: Rims Quote:
|
Re: Rims Quote: |
Re: Rims Quote:
How is the offset, is it much wider then with axial rims? Skickat från min iPhone med Tapatalk |
All times are GMT -6. The time now is 12:51 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com