"OPIE" https://uploads.tapatalk-cdn.com/201...e411c047ad.jpg Picked up the old girl on fleabay, she has been rode hard....... Went thru front axle, threw stock steering links out, SSD on the way.new bearings, HD gears,incision locker with new screws. All steering upgrades are sitting as one top hat was missing, Tower stocked ! And grabbed a set of MIPs with Traxxas 4mm pins. order time will be next Tuesday Inspect and replace front and rear with a VP stage one kit. Thought links would last, new VP coming.RPP spare pinion, sensor cable . Then I ordered droop parts and a roof from AMF , and a cf hood Before https://uploads.tapatalk-cdn.com/201...18a28a98ca.jpg During https://uploads.tapatalk-cdn.com/201...e3e59739ca.jpghttps://uploads.tapatalk-cdn.com/201...51168bbfb7.jpg Motor / esc Tekin17.5 with a HHBLE Hang up and Drive |
The Slider Spent a bench day and rebuilt the axial shocks, I'm running the TALL prolines in front, the stock rear yetis with metal caps and custom valving may need more spring, but close. Has great flex , but not tooooo soft More to come, few more upgrades on the way ... MIPs, TI links, hood and a roof to match my panel work, even made a sweet tray for electronics https://uploads.tapatalk-cdn.com/201...9293956c84.jpghttps://uploads.tapatalk-cdn.com/201...8a79479e06.jpg https://uploads.tapatalk-cdn.com/201...9f3df1d0cf.jpg Hang up and Drive |
Re: The Slider Front is binding with the new chubs, no idea why, guess I will go play Hang up and Drive |
The Slider Still no clue, it might be the hexes. Made a few panels today, sides and a rear shelf to hold the esc under the seats.... lookin like it might work Waiting on a AMF roof and a CF hood. I started with Harley's cad PDF pattern, threw it out as useless, didn't fit ! https://uploads.tapatalk-cdn.com/201...f908eb700d.jpg https://uploads.tapatalk-cdn.com/201...77df3916b4.jpg https://uploads.tapatalk-cdn.com/201...ffc03391d7.jpg https://uploads.tapatalk-cdn.com/201...a711e4ef75.jpg Hang up and Drive |
Re: The Slider Looks a little tall to me to be a slider. |
Re: The Slider Lowering kit should be here tomorrow . Not sure if I want Pogo though ......... Hang up and Drive |
Re: The Slider Finished the tins, inner fenders will wait until shocks are mounted with lowering kit . https://uploads.tapatalk-cdn.com/201...5b3486b6cb.jpghttps://uploads.tapatalk-cdn.com/201...db8f068d84.jpghttps://uploads.tapatalk-cdn.com/201...d42d8fbbce.jpg Hang up and Drive |
Re: The Slider Looks good, but why is she sitting so high? Even though I've been in the game for a while, I'm still a newb. |
Re: The Slider Lowering kit needs install, wanted long shocks Hang up and Drive |
Re: The Slider Quote:
Ahhh gotcha. Looks good! Even though I've been in the game for a while, I'm still a newb. |
Re: The Slider Quote:
A first for me....New bearings turned out to be TOO THICK went thru everything, was totally shocked, just picked up a new tube at the LHS, dug around found a few fast Eddies in the drawer, SMOOTH!!!"thumbsup""thumbsup" |
Re: The Slider you could soften the suspenson to get some sag to make it lower for now |
Re: The Slider Quote:
Lowering kit is here, tonight new links and on to suspension Hang up and Drive |
The Slider Installed some links and the lowering kit..... getting there, roof panel works well, CF hood is killer, need to cut a couple of shock pockets in it https://uploads.tapatalk-cdn.com/201...c33e7adb75.jpg https://uploads.tapatalk-cdn.com/201...746f64d10b.jpghttps://uploads.tapatalk-cdn.com/201...28a8ae26f1.jpg https://uploads.tapatalk-cdn.com/201...01eaffb658.jpg https://uploads.tapatalk-cdn.com/201...7a275570fa.jpg Hang up and Drive |
Re: The Slider Found an issue and was easily solved. After installing the lift and softening the shocks major stoppage as the servo smacked into the frame. Well much to my surprise, it was installed backasswards ! So now I have full travel, put a set of blue/blue springs in the prolines and unreal suspension ! Went sideways around things I never thought about with the R1 ! https://uploads.tapatalk-cdn.com/201...f3b91d8716.jpg https://uploads.tapatalk-cdn.com/201...b50736f9f7.jpg Hang up and Drive |
The Slider Bit more cutting, cut the brand new hood, and put in a set of rear pins to locate the front caps. First part of the old fastback mod done, the Zona arrived. https://uploads.tapatalk-cdn.com/201...77a680e2f8.jpg https://uploads.tapatalk-cdn.com/201...7ceeb05aa4.jpg https://uploads.tapatalk-cdn.com/201...d6f68bf979.jpg Hang up and Drive |
Re: The Slider Looking good mate are you going to paint the panels? Freekyskinz make some awsome skins for the wraith. That bonnet looks trick though so don't cover that.....and stop bashing on the R1 please lol Sent from my SM-G935F using Tapatalk |
Re: The Slider Thanx, I think the tins will stay bare, still inner fenders to fab.I loved my R1, until this changed my mind. Same tires, motor, shocks, and this one embarrassed my R1 https://uploads.tapatalk-cdn.com/201...2c613095b6.jpg Hang up and Drive |
Re: The Slider dude i love the wraith its my fav ive seen so far.... the r1 was sitting so damn high are those 1/8 scale shox?? i want yer wraith tho.. |
Re: The Slider No the shocks are a combination of stock axial rears, with metal caps, 3 hole pistons,35w. The others are Proline Yeti rears also, also with 3hole pistons, now running blue/blue springs. These rigs see rip rap primarily so tall suspensions and good tires are a must. https://uploads.tapatalk-cdn.com/201...6d1b326b23.jpg Hang up and Drive |
All times are GMT -6. The time now is 04:12 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com