| |
| |||||||
 |
| | LinkBack | Thread Tools | Display Modes |
12-08-2010, 07:25 AM
| #1 |
| Quarry Creeper Join Date: Oct 2010 Location: McKinney
Posts: 344
|  Electronics configuration
So how is everyone mounting their various electronic components? Is anyone using the shipped dual tray setup? I'm guessing not.  I'm currently using just the batt tray. I have the M2 Dig ESC mounted to the bottom of the chassis, the batt on the bottom side of the plate between the links and the receiver on the top inside portion of the tray. I've been thinking of making a lexan tray across the lower links and mounting the battery on that. Then remove the batt tray, and mount the receiver on the inside wall on one of the TVP's. Thoughts on that ideer? I'm curious on how others are setting up. |
|  |
| Sponsored Links | |
| | |
|
12-08-2010, 09:54 AM
| #2 |
| Rock Crawler Join Date: Oct 2007 Location: south of France
Posts: 586
|  here's my setup just use my dremel on this electronic plate... and invert it I've see this on the forum (sorry for this non explicative pics....) |
|
| |
|
12-08-2010, 10:13 AM
| #3 |
| Rock Stacker Join Date: Nov 2010 Location: uk
Posts: 50
|
Ive just finished the build on mine and have it set-up totaly stock.....for the time being   |
|
| |
|
12-08-2010, 10:46 AM
| #4 |
| Rock Crawler Join Date: Aug 2008 Location: Wine Country
Posts: 899
| Here is what I did, I used an old battery tray from my AX10. trimmed it and bent it.    Any q's fell free to PM me. |
|
| |
|
12-08-2010, 12:20 PM
| #5 |
| Quarry Creeper Join Date: Mar 2008 Location: N. Ridgeville , Ohio
Posts: 461
| Castle Creations Sidewinder Punk dig SR3000 rx Common sense 850mah 3s li-po Castle Creations BEC custom electrics tray (used to be a dettatchable radio face plate case)  |
|
| |
|
12-08-2010, 12:48 PM
| #6 |
| I wanna be Dave Join Date: Jan 2008 Location: GrandRapids, MILITIAGAN
Posts: 3,197
|
DIfferent chassis, CC sidewinder CC Bec Punk dig 1000 35c 3s lipo sr300 RX 12GA Deans wires  And here is the stock chassis, and the rats nest  |
|
| |
|
12-08-2010, 04:43 PM
| #7 |
| Quarry Creeper Join Date: Oct 2010 Location: McKinney
Posts: 344
|
I just finished with modifying my electronics layout. I removed the batt tray, and made a lexan tray which goes from the base of the chassis out between the forward links. Then, rear to front, I have the M2 ESC, receiver, battery. Unfortunately, this method seriously limits my battery choices. If I swap the receiver for the small one, that'll help some, and I'd be able to run some of the small rectangle ones. I've been running a 2000mah batt, serious overkill for comps, but nice to have for practice and running about. The square Losi 600 or 800, don't remember which it is, works perfectly.   I'll get a couple extra batteries so I have run time, and see how this goes for now. Can't get the CG any lower than this. |
|
| |
|
12-09-2010, 02:12 PM
| #8 |
| Rock Stacker Join Date: Aug 2010 Location: in my house
Posts: 97
|
the tray isn't in the rig here, but i cant get this pic while its in it.  Heres with the tray in the rig. i got space out the wazoo still.  Last edited by DA1378; 12-09-2010 at 02:14 PM. |
|
| |
|
| |
Linear Mode
