| |
| |||||||
 |
| | LinkBack | Thread Tools | Display Modes |
12-21-2010, 03:36 PM
| #1 |
| Rock Crawler Join Date: May 2010 Location: Calgary, Alberta, Canada
Posts: 771
|  Berg (offset) wheels on XR10?
OK, so i am looking at buying some wheels for my XR10, before i drop a bunch of money on a set, i just need to confirm that berg offset wheels will fit (and function) on the xr10...
|
|  |
| Sponsored Links | |
| | |
|
12-21-2010, 04:27 PM
| #2 |
| RCC Addict Join Date: Dec 2007 Location: Ward, SC
Posts: 1,108
|
Most Berg offsets will work and function with a stock XR10 but not all Berg offsets will work with the VP Knuckles. You should clarify which wheels you are looking at buying rather than ask such a general question. Hope this helps.  Last edited by limited77; 12-21-2010 at 04:35 PM. |
|
| |
|
12-21-2010, 08:07 PM
| #3 |
| Rock Crawler Join Date: May 2010 Location: Calgary, Alberta, Canada
Posts: 771
|
looking at the mayhem double phatty's and i have stock knuckles right now... will likely keep it that way.
|
|
| |
|
12-21-2010, 09:34 PM
| #4 |
| I wanna be Dave Join Date: Jan 2008 Location: GrandRapids, MILITIAGAN
Posts: 3,197
|
Is the offset close to the XR on the mayhems? I was going to get mayhems in the AX10 offset.
|
|
| |
|
12-21-2010, 09:38 PM
| #5 |
| I wanna be Dave Join Date: Oct 2007 Location: 801
Posts: 2,941
|
I run Mayhem UCW berg offset wheels in the front and Mayhem Wicked J UCW Axial offset in the rear. Both pairs are 1" wheels. The Vanquish knuckles do require I use a Wide hex in the fronts. But I am at 10 7/8" tire-to-tire in the front and 10 5/8 in the rear. I used to run a full set of berg offset. But with the channels we climb around here the narrow rear hurt more than helped. |
|
| |
|
| |
Linear Mode
