12-10-2011, 09:32 PM | #1 |
Rock Crawler Join Date: Nov 2011 Location: Wister, OK.
Posts: 697
| Chassis and stock links
Is there any aftermarket bodiless chassis out there that use the stock links? I bought some Chaotic Crawlers suspension links for the stock XR10 and I am now having second thoughts about the stock chassis. Any suggestions? |
Sponsored Links | |
12-10-2011, 10:06 PM | #2 |
Rock Crawler Join Date: Oct 2009 Location: Michigan
Posts: 895
|
I ran stock links on my BJ4, I just cut the rod ends down to make it with in spec...
|
12-11-2011, 05:55 AM | #3 |
RCC Addict Join Date: Jul 2009 Location: Reno, Nv
Posts: 1,964
|
You could always sell the links, to say..................................me? And buy links for the new chassis. The stock chassis is great.
|
12-11-2011, 06:04 AM | #4 |
I wanna be Dave Join Date: Mar 2008 Location: In the Dark Edges of your Mind
Posts: 6,386
|
It would be kind of hard to find one now, but the JP Customs Helstrom bodiless chassis for the XR uses the stock links. Any bodiless that uses the stock skid will keep the stock links. |
12-11-2011, 10:38 AM | #5 |
I wanna be Dave Join Date: Oct 2007 Location: 801
Posts: 2,941
|
Our chaotic special could possibly be used with the chaotic xr10 links. You will have to use the axial rod ends that come with the xr10(just need to be drilled to accept 4mm). And even with short axial rod ends on the front uppers the servo will still tip forward slightly.
|
12-11-2011, 05:50 PM | #6 |
I wanna be Dave Join Date: Dec 2008 Location: Madrid, IA
Posts: 2,015
|
im using stock length axial links on my bjv4 chassis xr10, just had to change some rod ends to get it where i wanted
|
| |