12-05-2011, 03:04 PM | #1 |
Rock Crawler Join Date: Oct 2010 Location: triad
Posts: 634
| Concrete's XR
Well the deed is done. I'm pretty happy with my new toy. Purchased Trugg's rig which he spent some serious time and money setting it up. XR axles VP motor plates VP motor cases VP steering knuckles VP lockouts Hitec 7950 steering servo HR machined gears in the front Knuckle Weights Revo rod ends Caotic bent links-upper & lower Ti steering link Axial XR shocks with Losi gold springs & jeepindoug spring cups CC BEC CC Mamba Max Pro 1 cell Punk Dig Team Brood 2011 SE 35T motors BJv4 White chassis VP SLW wheels First thing is i know this thing is waaaaaay too wide. I just tossed my wheels with hubs from my losi on (850 rear 725 front). So i'll need some hubs and i will search to see what everyone is running. Second, i need a real steering link because the one i tossed on is junk. Third, i need steering servo protection and a way to mount my battery on the front axle. Lastly, i know the electronics are horrible looking. I got the rig and within an hour had to leave to head out for camping and 1:1 wheeling and wanted to bring this with me, so i just jammed what i had in place. One question i have is running a single mamba max pro 1cell with external BEC and i noticed no matter if i'm using a 2s or a 4s, as it climbs, the front seems to want to stall while the rear keeps going. Is that just from using one ESC? Last edited by concretejungle; 01-08-2012 at 05:23 PM. Reason: update info and pics |
Sponsored Links | |
12-05-2011, 03:36 PM | #2 |
Rock Crawler Join Date: May 2009 Location: Calgary
Posts: 911
|
You should really add one of those photos to the "Best Wiring Jobs" thread. |
12-05-2011, 04:44 PM | #3 |
Rock Crawler Join Date: Oct 2010 Location: triad
Posts: 634
| |
12-05-2011, 04:48 PM | #4 |
E.Y. Designs Join Date: Sep 2011 Location: Springfield, OR
Posts: 3,591
| |
12-05-2011, 05:14 PM | #5 |
Rock Crawler Join Date: Oct 2010 Location: triad
Posts: 634
|
Thanks! So no answers on my question about the front stalling out on me? Is that because of one ESC? |
12-05-2011, 05:47 PM | #6 |
Quarry Creeper Join Date: May 2009 Location: pacific NW
Posts: 415
|
i had stalling issues, but it was with some El Cheapo motors. My broods that i just ran for the first time last Sunday where great with no stalling issues. One questions about the motors, how old are they? Are they new? Or were they used? Just wondering if a rebuild or something might be due. I honestly dont know much about motors, just a thought...
|
12-05-2011, 05:54 PM | #7 |
Rock Crawler Join Date: Oct 2010 Location: triad
Posts: 634
|
they are brand new motors.
|
12-05-2011, 06:06 PM | #8 |
Quarry Creeper Join Date: Apr 2009 Location: sandia park, nm
Posts: 263
|
are you using a dig? and are you running the same pinion front and rear? |
12-05-2011, 06:45 PM | #9 |
Rock Crawler Join Date: Oct 2010 Location: triad
Posts: 634
|
I am running a punk dig. Good question about the pinions. I feel pretty sure they are the same. |
12-05-2011, 06:56 PM | #10 | |
Rock Crawler Join Date: Oct 2009 Location: Michigan
Posts: 895
| Quote:
For the steering run a Jato and a Revo rod end with a 4mm or 8/32 set screw joining them togather, and a robotronics servo arm. I like my VP servo guard. IMO the battery takes too much of a beating on the front axle, but from what I have seen the Rowdy Racing battery mount is the way to go. Looks like an awesome rig...have fun with it. Last edited by BLKXJ 96; 12-05-2011 at 07:17 PM. | |
12-05-2011, 07:40 PM | #11 |
I wanna be Dave Join Date: Mar 2008 Location: In the Dark Edges of your Mind
Posts: 6,386
|
Mine stalled in the front for a couple of reasons... Cheap motors... and The front turns so sharp the tires rub stuff and stall the front ...and the u joints take a while to free up which helps cause the stalling when turning sharply. |
12-05-2011, 07:49 PM | #12 |
Rock Crawler Join Date: Oct 2010 Location: triad
Posts: 634
|
It's funny, my buddy who has a bully with cheap integy motors and one tekin esc and a punk dig does the exact same thing.
|
12-05-2011, 08:00 PM | #13 |
Quarry Creeper Join Date: Apr 2009 Location: sandia park, nm
Posts: 263
|
i ran a punk on my bully, with good motors and different pinions and still had stalling issues. i got duel escs and stall disappeared.
|
12-05-2011, 09:06 PM | #14 |
Newbie Join Date: Jun 2011 Location: Mpls
Posts: 19
|
Stalling= Punk dig.... or ESC setup.... It is just the way it goes.... Also.... If the motors have ireg. in the rotor, and they are not broken it... This can also have a effect of stalling... or addition of it... |
12-05-2011, 09:09 PM | #15 |
Newbie Join Date: Jun 2011 Location: Mpls
Posts: 19
|
Did He throw in the MILK crate as well??? Every racer needs one of those.... You can place all your empty bee...erummmm Red bull cans in.... |
12-06-2011, 06:44 AM | #16 |
Rock Crawler Join Date: Oct 2010 Location: triad
Posts: 634
| haha, no that was an upgrade i already had. It works perfect! I can put my ammo box of batteries, spare parts, battery charger, Tx and then the rig fits snuggly sideways. Then i can put it in the cruiser and put a strap on it so if i'm wheeling it will stay secured. |
12-06-2011, 03:23 PM | #17 |
Rock Crawler Join Date: Oct 2010 Location: triad
Posts: 634
|
for discussion purposes i have a little video i just shot showing the front stall. I tossed a few rocks out back to climb around on. It's a lot more difficult to film with one hand and try to wheel with the other! XR10 front stall - YouTube |
12-06-2011, 06:05 PM | #18 |
I wanna be Dave Join Date: Dec 2008 Location: anderson
Posts: 2,288
|
try running shorter wire to the front an run one or two teeth bigger on the front motor an it will help a bunch
|
12-06-2011, 07:12 PM | #19 |
Rock Stacker Join Date: Oct 2005 Location: North side
Posts: 58
|
Pinion mesh out of whack? Listen to some other XR10 videos, none of them sound like yours does.
|
12-07-2011, 07:05 AM | #20 |
Rock Crawler Join Date: Oct 2010 Location: triad
Posts: 634
| |
| |