My XR10 |
Re: My XR10 This is my XR10 I just got done building. I have a Tekin FXR esc, (2) rc4wd 55t motors, Aluminum links upgrade kit, Hitec 7955 tg servo, rc4wd rockdig II, rc4wd 2.2 Outcroppers and JConcepts body. I am running a Spectrum trans and receiver. It crawls nice and has good power. Still working on tweeking this a bit. |
Re: My XR10 like the colour, one suggestion tho, get yourself a set of rovers or sedonas, cheap and way better than the ones you have on imop. |
Re: My XR10 I know a lot of guys I crawl with use them. I wanted something different and these seem to work pretty well. Thanks for the advice tho. |
Re: My XR10 Adding some upgrades to my XR10. Axial heavy duty motor plates and bearings, Crawler Innovations dual foam inserts and motor covers, Axial black shock springs and CKRC front & rear axles with the brass inserts. Added Rc4wd turbo BEC. Hopefully this will keep my stock gears from breaking and give me a little more articulation and better traction on the rocks. Pictures of upgrades to follow soon. |
Re: My XR10 Received my axial black springs today along with front and rear axles with brass incerts, heavy duty motor plates and bearings and my bullet weights fro the rims. Just waiting on my crawler innovations foams and motor covers to get here. |
Re: My XR10 What axles are you referring too? Gotta link? |
Re: My XR10 here it is. basically just the stock diffs with the brass insert mod done already. https://www.ckrccrawlers.com/ckrc-mo...2c65caf33e83b8 |
Re: My XR10 Cool, thanks. I didn't know that they sell those already modded. |
Re: My XR10 Here is my new parts. http://i1263.photobucket.com/albums/...7/_MG_9512.jpg http://i1263.photobucket.com/albums/...7/_MG_9513.jpg http://i1263.photobucket.com/albums/...7/_MG_9518.jpg http://i1263.photobucket.com/albums/...7/_MG_9516.jpg http://i1263.photobucket.com/albums/...7/_MG_9511.jpg http://i1263.photobucket.com/albums/...7/_MG_9510.jpg Front tire weights and complete weight of my XR10 with stock chasis. |
Re: My XR10 I ordered two new Tekin 45t motors from RPP and lengthened and lowered my suspension on my XR10. Hopefully with all the recent mods it will crawl better and save parts breakage. I will post pics when all back together. |
Re: My XR10 Quote:
|
Re: My XR10 Almost 11 & 3/4 inches, I removed all the short rod ends and replaced with longer ones. I also moved my shocks out to gain more articulation. I went from 3 1/4 inches belly clearance to 2 5/8 inches. I gave up some clearance but it crawls and sidehills better now. |
Re: My XR10 I am curious, does anyone know what laying the shocks down does? |
Re: My XR10 No, what?:shock: |
Re: My XR10 I think it changes the leverage points on the suspension. |
Re: My XR10 Quote:
Laying down the shocks effectively lowers your spring rate. (softens the suspension) |
Re: My XR10 Quote:
|
Re: My XR10 I don't believe so, because the shock stroke stays the same. To limit articulation, you need to shorten the travel of the shocks. |
Re: My XR10 Here is my XR10 all back together and running great. http://i1263.photobucket.com/albums/...7/_MG_9520.jpg http://i1263.photobucket.com/albums/...7/_MG_9523.jpg My delrin motor covers by Crawler Innovations and Tekin 45t'S. http://i1263.photobucket.com/albums/...7/_MG_9524.jpg Front springs are Axial black and Axial heavy duty motor plates and bearings. http://i1263.photobucket.com/albums/...7/_MG_9525.jpg Added a fan to my Tekin FXR to help keep cool. Let me know what you think. |
All times are GMT -6. The time now is 03:14 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com