car/truck stand help Is anyone using a car/truck stand w/ their Yeti XL's? Which ones work since they'd have to be tall enough and stable enough to keep the truck balanced? Thanks. |
Re: car/truck stand help I have used a Rigid pipe stand found at Home depot for around 30.00 for my 1/8 and 1/5 scale cars it has adjustable height and works great. RIDGID Flip Top Portable Work Support-AC9934 - The Home Depot |
Re: car/truck stand help Quote:
For the bench i use this http://www.amazon.com/Stage-FS7850B-.../dp/B000CD1R7K ** Since it is a footrest, you do have to drill out the existing pivot point and make a new pivot hole so it will go up and down flat but for less than $1 i bought the cheaper one. or you could spend $$ if you have deep pockets fo rthe same thing here Overdose Racing "The Car Stand" Adjustable Stand [ODR1010] | Maintenance - AMain Performance Hobbies - AMain Performance Hobbies. |
Re: car/truck stand help I don't have any pix of it alone.... But I made one out of a $5 dollar store foam roller, shoe goo, and some duct tape. Works awesome. From this http://uploads.tapatalk-cdn.com/2016...c958f0b497.jpg With my XL on it: http://uploads.tapatalk-cdn.com/2016...860474db9f.jpg 380 http://uploads.tapatalk-cdn.com/2016...3e78ee03b2.jpg http://uploads.tapatalk-cdn.com/2016...f7b5c1fc21.jpg Sent from my iPhone using Tapatalk |
Re: car/truck stand help I have a old stand I had from racing buggy in the 90s.... just dug it out . It doesn't fit perfectly but for display it's cool. http://uploads.tapatalk-cdn.com/2016...0cceaffdc7.jpg http://uploads.tapatalk-cdn.com/2016...0cc948a6bd.jpg Sent from my SAMSUNG-SM-G850A using Tapatalk |
Re: car/truck stand help 1/8 aluminum plate and I tig weld it together. Coat the top with under coating for anti slip. Good parts storage in the middle. plus options are endless as far as height and such. I have built one for all my trucks and make em custom fit or sized for the truck. http://i621.photobucket.com/albums/t...ps1ydjc1pp.jpg |
Re: car/truck stand help Similar to Barndog, I've been using the Rockwell Jawstand. It might be a little overkill but I originally picked it up for my 1/5 scale rigs but works great for my YXL too. To mount the YXL, I just cut a piece of 2x4, small piece of plywood to fit under the YXL and covered it with tool box drawer liner. Works great and "no slip". Rockwell JawStand-RK9033 - The Home Depot |
All times are GMT -6. The time now is 05:01 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com