|
| LinkBack | Thread Tools | Display Modes |
01-05-2010, 01:12 PM | #1 |
Sinking with the ship Join Date: Mar 2005 Location: El Capitan...sole survivor and sinking fast
Posts: 8,864
| Bruiser Rear axle 12mm conversion service Bruiser 12mm Rear Axle Machining (Part # B12C-MA) Price $95 + shipping paypal - Idobyketricks63@aol.com Axles machined 10 at a time or more (See below for shipping and ordering information) Included (does NOT include bruiser axle) Rear Axle housing machined to fit sleeve Inner axle narrowed, threaded and hole drilled for pin (2) Rear sleeves to house outer bearings (2) Bearing spacers/race shortened to match housing width The following bearings or bushing sizes are required and NOT supplied (5) 5mm x 11mm x 4mm Metal Shielded bearings (2) 5mm x 8mm x 2.5mm Metal Shielded bearings Teflon 5mm x 8mm shims (optional) Axles will be returned unassembled. Installed Installed Installed Add $7.50 for return shipping International shipping is approximately $26.50 priority insured or $12 for first class uninsured Order Details In order to keep costs down I *have to* send 10 axles or more at a time to be machined. This saves a lot of cost on setup and gives me the pricing I posted above. Lead time for machining is 3 weeks once axles are submitted to the machinist. Send me a PM or email to Idobyketricks63@aol.com for a ship to address. Payment is due before axles are submitted to machinist. ***Please be aware, a 3 week turn around is the *ESTIMATED* time, The axles are NOT machined by myself, they are sub'd out to a machinist OUT OF MY STATE . If you are impatient then this service is NOT FOR YOU. I will do the best I can to update everyone as they are being done. The machine shop that is doing them is the same shop Nick Rummy has used so these will come out just as awesome as they have in the past!*** I will most likely only offer this service during the winter months (jan-march) as its the only time of the year where I dont work saturdays. This will allow me time to get the axles to the PO to be mailed, machined, returned and returned back to you the customer. Thanks Mike |
Sponsored Links | |
01-05-2010, 01:13 PM | #2 |
Sinking with the ship Join Date: Mar 2005 Location: El Capitan...sole survivor and sinking fast
Posts: 8,864
|
LIST 1BadJeepBruiser- 1 Axle fj40indy 1 axle surya.prash17 1 axle lappdogg 1 axle Last edited by 1BadJeepBruiser; 01-18-2010 at 06:26 PM. |
01-18-2010, 06:26 PM | #3 |
Sinking with the ship Join Date: Mar 2005 Location: El Capitan...sole survivor and sinking fast
Posts: 8,864
|
Need 6 more axles in order to this guys! Front Cs should be here at the end of the month!
|
08-25-2010, 10:04 AM | #4 |
Sinking with the ship Join Date: Mar 2005 Location: El Capitan...sole survivor and sinking fast
Posts: 8,864
|
I am bumping this thread to the top here... I have a few people buy some Cs and some are interested in having the rear axle machined, BUT I cannot do it unless I get a MINIMUM of 10 PEOPLE. So if you have a Bruiser axle and you DEFINITELY want it machined please post up! Please do not post if you are on the edge about it or uncertain, I will not collect the axles until I have 10 definitive people! -Mike |
10-27-2010, 12:53 AM | #5 |
Rock Stacker Join Date: Aug 2009 Location: kaneohe
Posts: 90
|
Hi...i was just going to buy a set to do this.so you still need more axles to come in??? Im bery interested..thank you
|
| |