| jason | 02-01-2010 03:42 PM |
Honcho/SCX-10 Summit transmission mount.
3 Attachment(s) Here it is, I have been getting a ton of pm's from people wanting my Summit mount for the SCX-10/Honcho's.
This mount will allow you to mount a Traxxas 2-speed transmission directly into your SCX-10/Honcho, making no permanent changes to your rig so you can change it back at any time.
Summit transmissions are being found on ebay for anywhere between $35-$70.
To make this easier to mount and to have stronger driveshafts I also switch to emaxx shafts when I do this conversion. If you want to do that as well you'll need traxxas part number 4951x and 2 of part number 4928x. The shafts will mount directly to the summit trans, then to mount them to the axle use my, " Maxx shafts made easy" method.
To mount this setup in your scx-10, remove the stock trans and driveshafts. Flip the skidplate so that the transmission holes are on the drivers side. Bolt the summit trans onto the mount using 2 4mm screws, then mount your servo to the plate using 2 of the servo mounts that come with every scx-10 kit.
Slip 2 18mmx3mm screws through the outer stock transmission mounting holes, slide the delrin spacer onto those screws, then drop the whole plate with servo and trans onto the spacer and add 2 3mm nuts to hold it all together.
Currently out of stock, should have more on hand by mid-February.
Cost is $20 for the mount and $5.00 shipping for a total of $25 per mount. International orders will need to pm me for payment info to cover the additional shipping. | 