Nordic Crawler Design RC4WD Bully 2 Axle Accessories

[Tomy]

Nordic Crawler Design is proud to introduce accessories for the all new RC4WD Bully 2 axles.

All dimension units are millimeters. 1mm = 0.03937" / 1" = 25.4mm /


Extra Clearance Servo Mount

The Nordic Crawler Design Servo Mount locates your standard size servo as close as possible to the gear box housing for maximum clearance for your shock and lower links.
Servo is level with the bottom of the axle tube.

Made from 2.5mm carbon fiber. Lightweight at 5.6g, including steel screws and delrin spacers.

The servo mount is compatible with the RC4WD tie rod. You will need to use a 4mm long spacer to increase the length of the RC4WD drag link due to the servo being located more towards the center of the axle.

Now is also a Hitec 7980 -size mount available. This mount does not provide much extra clearance for your shocks. Please make sure you leave a message with your payment specifying you need the 7980 -size mount.

Price: 13 euros shipped worldwide.












Battery Tray

At 57mm long and 22mm wide this battery tray will work well for 3S 400mAh lipos. Made from 2.5mm carbon fiber. Very stiff and very light at 4.1g.

Price: 8 euros shipped worldwide














Electronics Tray

Axle mounted Electronics Tray which places the weight of your electronics on the front axle.

Made in 2mm carbon fiber. Weight is 12.2g including screws and alloy spacers.

Price: 17 euros including world wide shipping.










Weight Brackets

Nordic Crawler Design, RcBros and Dlux compatible weight brackets available. Please specify what brand weights you are using. Brackets are different for different weights.

Made from 2mm carbon fiber. Slotted for adjustability. Flat head hardware included.

Price: 10 euros for a set of two shipped world wide.

Please note! Nordic Crawler Design does not fabricate or sell weights. RcBros currently sells the weight system originally developed by NCD.






Please paypal to: tomi.ylkanen@gmail.com
Leave a message stating what your payment is for.


If you buy more than one of the above listed products you can deduct 2 euros for each added product.

For example my package deal on a Servo Mount, Battery Tray and E Tray is 34 euros shipped worldwide

[Haastnooit]

Great looking parts Well done ...

[Tossedman]

Tomy, what are the dimensions of the electronics tray. Wondering if it'll fit my chassis.

Todd

[Tomy]

Good question, Todd.

I added dimensions to the first post. If you need your etray to have custom dimensions, I can change length and width. I cannot customize the mounting hole spacing.

[cabron]

my motors stick up above the top of the tranny by about 1mm
does the mounting plate rest on top of the motor or do you have a spacer under there?

what is 17 euros in us dollars?

thanks nice trays

[Tomy]

@ cabron

You will need to space up the electronics tray just a little from the gearbox case. You can use a few M3 washers or small o-rings. I use three 3mm ID o-rings.


I can do 2 etrays for 32 euros shipped worldwide. 32 euros is $43 today. Exchange rates vary a little from day to day. You can always use an online currency converter to check costs in your own currency.

XE - The World's Favorite Currency and Foreign Exchange Site

[Tomy]

All orders have shipped today. Thanks for the support!

[Liv3mind]

Are these still available?

[Tomy]

Yes, they are.

[chevotafun]

Order these partz guys
there top notch and Tomi is awesome to deal with.

[Master Basher]

i'm gonna need some of this stuff real soon, my axles come tomorrow! I can't wait!

[Spiitz Travsky]

I just received a set of accessories from Tomi for my Bully 2 build in record time. It took two days to get to North Carolina from Finland.

I could not be happier with his craftsmanship and friendly nature.

His servo mount offset gave me the extra clearance I needed to avoid shock rub at full compression and the parts all have very tight tolerances.

Keep innovating Tomi!

[Master Basher]

Okay, so I'm ready to order, but I wonder if Tomi has anything dreamt up for mounting the standard plus sized servo. I just bought my M7990 servo and I have no way to install it without grinding on the brand new case as the holes don't perfectly line up for using the stock bully 2 mounting bracket. Can you work out the hole spacing and a bracket for the plus sized servo Tomi?

[Master Basher]

just ordered my battery mount and electronics tray! Excited about how nice these things look.

[Tomy]

Originally Posted by Master Basher

Can you work out the hole spacing and a bracket for the plus sized servo Tomi?

I can try. I just sent you a pm.

Tomi

[Tomy]

A Hitec 7980 size servo mount is now available.

[coliver14]

Tomi,
Are these parts still available?

[chevotafun]

Tomi no longer offers any NCD stuff.

Dravpnir on here will be taking over the NCD line, if your looking for anything from the NCD line give Dravpnir (Tobias) a shout.