OverkillRC's: The Phoenix

[losikid]

OverkillRC brings to you the ultimate LCC Shafty specific comp chassis. This is chassis system has many unique features that will bring that belly dragging Losi into the air that only MOA's have breathed before-

The Chassis:
Made out of laser cut 1/8" delrin, these plates are designed with strength, adjustability, and clearance in mind. This chassis is capable of pushing your shafts to 4.75" of clearance (although COG and shaft life suffers with anything over 4"s of clearance)

The Topper:
Oh yea, it has the bodiless option built in

LCG Dig Servo Mount:
When pushing that belly to insane heights we couldn't cut costs so designed and include a LCG dig mount for increased stability and a lowed cog

The Shark Fin:
Gives more than an extra inch of vertical link separation in the rear that allows for high clearance links and plnety of adjustment for many ride heights

An Overkill Skid:
is just 2" wide and built out of super slick delrin with A2 Tool steel captured rods to hold your lower links in place. Its allso pre-drilled for tranny placment

(The CAD model doesn't show it, but there will be coutersunk holes for the tranny)

USRCCA legal

Here is a teaser vid made awhile back...the topper shown is NOT the topper included

OverkillRC The Phoenix-Ultimate LCC Chassis - YouTube

and a assembled proto pic

Pricing and availability is at OverkillRC.com

[Duuuuuuuude]

Well that just looks ridiculous.













Har. Nice work man...looks good.

[cliff1119]

awesome looking chassis will it work with the ax 10

[losikid]

Originally Posted by cliff1119

awesome looking chassis will it work with the ax 10

Its never been tested nor mounted to an ax-10..and would probably require alot of custom fab work to make it work.

[cliff1119]

just went to ur website and seen only for losi

[losikid]

Almost ready to ship, had quite afew delay's...anyways, just need to get afew things in. All the crucial elements are ready to ship, just waiting on afew spacers and the chassis to dig mount piece.

I believe i still have 6 left...remember, although you may not want to go lcc pro, a losi/overkillrc based sportsman will dominate your class.

Here's some pics of the production chassis with the red ALUM hardware...

Originally Posted by ghtpdm5

alright, enough teasing you guys. this is a production model phoenix ready to roll minus panels. enjoy!











just threw it on the scale 5lbs 0.6oz with cbp.com 1000mah batt (no panels). with the smc c-max 850, that dropped to 4lbs 15.6 oz, again, no panels yet.

[jdmguy760]

is it alright to have that angle on the rear drive shaft also when these gonna be in stock?

[losikid]

Originally Posted by jdmguy760

is it alright to have that angle on the rear drive shaft also when these gonna be in stock?

They work...just have to make sure you clock the rear axle.

I'm accepting pre-orders now, hoping to ship by the end of the month

[jdmguy760]

clock how you do that with links im kinda new to this also do you supply links to buy

[losikid]

Originally Posted by jdmguy760

clock how you do that with links im kinda new to this also do you supply links to buy

you make the upper links longer, it will rotate the axle back so the pinion points to the tranny.

No, i don't offer links to buy at this time

[losikid]

I was digging through boxes and found enough stuff to sell a complete chassis,

2x chassis plates
2x topper plates
1x v2 sharkfin
1x v2 skid
spacers
hardware.
alum hardware package

I'll do 105 shipped....all i can't find is the piece of key stock that mounts the lcg dig mount to the chassis.

PM me if you want it.