|
Irie Products Twin Hammer ball bearing steering & upright shock tower http://i53.photobucket.com/albums/g6...b07e0b165b.png http://i53.photobucket.com/albums/g6...oducts%202.jpg http://i53.photobucket.com/albums/g6...oducts%201.jpg Irie's Twin hammer ball bearing bell crank steering & upright shock tower. All parts 6061 T6 aluminum Each bellcrank rides on two precision ball bearings for a no slop no maintenance steering Shock tower is designed for G-made 85mm XD Piggyback shocks with no internal limiter or external bump stop to take advantage of the full travel of the shock Geometry of linkage has been 3D modeled to have as little bumpsteer as possible, almost not measurable Full kit $65.00 dollars shipped, Top plate and BB steering only $55 shipped 50 states What is included? 6061 Top Plate and steering arms riding on ball bearings, assembled Composite Shock tower Center link consisting of two ball ends and a turnbuckle 2-M3x25mm screws, for the tie rods to bellcrank 2-M3x20mm screws, for the bellcrank arms 2-M3x14mm screws, for mounting F of top plate / F of shock tower 2-M3x12mm screws, for mounting R of top plate 2-M3x6mm screws, for mounting R of shock tower to top plate 4-M3 nylon lock nuts For the upper shock mount reuse the factory cantilever posts Recommended servo horn part numbers: TLR1555 for 23T TLR1556 for 24T TLR1557 for 25T Irie's GCM Tower Steering kit $40 shipped 50 states http://i53.photobucket.com/albums/g6...oducts%203.jpg Included in kit Steering arms made from 6061 riding on ball bearing two per arm 2-6061 stand offs 2-M3x22mm screws 2-M3x25mm screws 4-M3 Nylock nuts 2-M3 Large washers 2-Offset ball ends 1-Center link Here is an install video that GCM was nice enough to do. THANK YOU <iframe width="640" height="360" src="//www.youtube.com/embed/TYAUWT6tgA4?rel=0" frameborder="0" allowfullscreen></iframe> Irie's Race Prepped Twin Hammers CVD Axles $45 Shipped 50 states http://i53.photobucket.com/albums/g6...oducts%204.jpg Axles are cryoed for strength then reassembled with 4037 chromoly cross pin and lubed with molybdenum disulfide. All together it makes a smooth running and pretty bomb proof axle. Recommend Vaterra HD outdrives to go with the axle's part #VTR232062 Anyone who purchased axles on or before 9/7/2014 receives 1 Free rebuild if you pay shipping. Just to say thanks Irie open rear diff axles. $25.00 http://i53.photobucket.com/albums/g6...oducts%205.jpg Also can do complete setup rear differentials. PM if interested Irie Products Wheel Bearing Kit $20.00 shipped 50 states http://i53.photobucket.com/albums/g6...bbc70a3bbe.jpg This kit covers all wheel bearings needed for the Twin Hammers, front and rear. These bearings are precision quality rubber sealed bearings made in the U.S.A. not overseas. Includes 2: 6mm x 12mm 6: 5mm x 10mm For Questions or comments http://www.rccrawler.com/forum/vater...-products.html Or PM me for fastest response I use PayPal invoices for payment PM for stock status Shipping Shipping is included in the price if shipped to the 50 states For Canada add $5.00 tracking included International shipping $13.50 I will not cover lost or damaged with international shipping More Products to come |
Re: Irie Products Twin Hammer ball bearing steering & upright shock tower Are the kits ready to go or is there any wait time? Also, does it include the drag link between the bellcranks? |
Re: Irie Products Twin Hammer ball bearing steering & upright shock tower Yes they are ready to ship and they come with all hardware to install. |
Re: Irie Products Twin Hammer ball bearing steering & upright shock tower Done deal. Awesome setup and will be thoroughly race tested starting with the Summer Season of U4RC. |
Re: Irie Products Twin Hammer ball bearing steering & upright shock tower think i might give this setup a try, i like the way it looks great job, even though i just recently installed the traxxas steering and blue monkey upright shock tower..irie..!:flipoff::badger: |
Re: Irie Products Twin Hammer ball bearing steering & upright shock tower Nice execution, I'll have to keep this in mind. |
Re: Irie Products Twin Hammer ball bearing steering & upright shock tower Quote:
|
Re: Irie Products Twin Hammer ball bearing steering & upright shock tower Very interested in this, would there be space under the hood for a battery with this setup? if so, what size battery would fit? |
Re: Irie Products Twin Hammer ball bearing steering & upright shock tower Quote:
|
Re: Irie Products Twin Hammer ball bearing steering & upright shock tower i would like to buy this. how do i order 1 |
Re: Irie Products Twin Hammer ball bearing steering & upright shock tower For anyone I may have missed the kits are back in stock To order PM me |
Re: Irie Products Twin Hammer ball bearing steering & upright shock tower Great looking well thought out kit built for heavy duty. :) |
Re: Irie Products Twin Hammer ball bearing steering & upright shock tower I had a few questions regarding the gcm tower kit you offer, 1. Is it in stock, 2. Is it a direct bolt on to their front tower plate, or does it require modification? --Dan |
Re: Irie Products Twin Hammer ball bearing steering & upright shock tower Quote:
2:No it does not require modification to the GCM plate Here is a link to a quick TM of install, check post #120 |
Re: Irie Products Twin Hammer ball bearing steering & upright shock tower I live in Australia and want the steering and upright shock mount kit you sell for $65, how much postage will I have to pay? And as a newbie how do I go about making a purchase? |
Re: Irie Products Twin Hammer ball bearing steering & upright shock tower Are there any GCM shock tower compatible steering bellcranks available at this time? Thanks! Pm sent. |
Re: Irie Products Twin Hammer ball bearing steering & upright shock tower ;-) Quote:
|
Re: Irie Products Twin Hammer ball bearing steering & upright shock tower Quote:
|
Re: Irie Products Twin Hammer ball bearing steering & upright shock tower Anyone have any idea when the full kit willl be back in stock? Also if any has a sttering kit they want to sell shoot me a pm. |
Re: Irie Products Twin Hammer ball bearing steering & upright shock tower this stuff still bein made or no? would like to pick up a full kit. |
| All times are GMT -6. The time now is 04:54 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com