RCCrawler Forums

nelso · 11-22-2009, 02:38 PM

em getting a cc for christmas and i was wondering if dig would work on it

73fordhighboy · 11-22-2009, 02:42 PM

yes. i dont have one yet, personally. punk dig. 3 channel controller required. one day

Reflection · 11-22-2009, 03:00 PM

Any MOA truck can use or be outfitted with an electronic dig system. The Punk digs are nice units. I've never ran one myself,but have seen them in action. They do work nice. I've always used 2 toggle switches and a micro servo with great performance. The toggle switch set up is typically a little bigger that the punk set up,but they both work good.

There are several variations of the toggle switch dig set up. The sticky thread in the Berg section shows of one way you can set it up and get everything wired.....My Dig Switch Box! Any of the MOA platform sections (Berg,Clod,Bully) can come in handy as far as looking for tech in hooking up electronics.

A 3 channel radio is needed. A modded TQ3 is what allot of guys start with. They are cheap and easy to find,it's something to start with anyway. A good used DX3 would be the next radio I would recommend,picked mine up a while back for $80 with a receiver.

gunch · 11-22-2009, 05:48 PM

Definitely, and if you decide to remove the rear steering like some of us do, it will be very handy. I cannot wait to get a punk dig because I feel like the steering angle of the CC is not good enough.

nelso · 11-22-2009, 05:52 PM

ya that was my plan

artsifrtsi · 12-06-2009, 09:30 AM

Yup, a punk dig is in the plans for mine as well... I already have the TQ3, bought it with the plans for a dig.

11-22-2009, 02:38 PM	#1
nelso Newbie Join Date: Nov 2009 Location: stansbury Posts: 17	dig em getting a cc for christmas and i was wondering if dig would work on it

11-22-2009, 02:42 PM	#2
73fordhighboy Quarry Creeper Join Date: Sep 2009 Location: west sacramento Posts: 282	yes. i dont have one yet, personally. punk dig. 3 channel controller required. one day

11-22-2009, 03:00 PM	#3
Reflection TEAM MODERATOR Join Date: May 2004 Location: Tennessee Posts: 10,855	Any MOA truck can use or be outfitted with an electronic dig system. The Punk digs are nice units. I've never ran one myself,but have seen them in action. They do work nice. I've always used 2 toggle switches and a micro servo with great performance. The toggle switch set up is typically a little bigger that the punk set up,but they both work good. There are several variations of the toggle switch dig set up. The sticky thread in the Berg section shows of one way you can set it up and get everything wired.....My Dig Switch Box! Any of the MOA platform sections (Berg,Clod,Bully) can come in handy as far as looking for tech in hooking up electronics. A 3 channel radio is needed. A modded TQ3 is what allot of guys start with. They are cheap and easy to find,it's something to start with anyway. A good used DX3 would be the next radio I would recommend,picked mine up a while back for $80 with a receiver.

11-22-2009, 05:48 PM	#4
gunch Quarry Creeper Join Date: Oct 2009 Location: Minneapolis Posts: 215	Definitely, and if you decide to remove the rear steering like some of us do, it will be very handy. I cannot wait to get a punk dig because I feel like the steering angle of the CC is not good enough.

11-22-2009, 05:52 PM	#5
nelso Newbie Join Date: Nov 2009 Location: stansbury Posts: 17	ya that was my plan

12-06-2009, 09:30 AM	#6
artsifrtsi Quarry Creeper Join Date: Oct 2009 Location: Florida Posts: 288	Yup, a punk dig is in the plans for mine as well... I already have the TQ3, bought it with the plans for a dig.

Sponsored Links

RCCrawler Forums

Thread: dig